Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

An Electron Acceptor Analogue for Lowering Trap Density in Organic Solar Cells

Reducing Trap Density in Organic Solar Cells via Extending Fused Ring Donor Unit of A‐D‐A‐Type Nonfullerene Acceptor for Over 17% Efficiency

Suppressing Trap‐Assisted Nonradiative Recombination via Interface Modification for Achieving Efficient Organic Solar Cells

Trap Suppression in Orderly Organic Photovoltaic Heterojunction

Trap-Filling of ZnO Buffer Layer for Improved Efficiencies of Organic Solar Cells

Self‐Aggregated Light‐Trapping Nanodots for Highly Efficient Organic Solar Cells

A Facile Synthetic Approach Based on Thieno[3,4-c]pyrrole-4,6-dione to Construct Polymer Donors for Highly-Efficient Organic Solar Cells

Optimizing Molecular Packing via Steric Hindrance for Reducing Non‐Radiative Recombination in Organic Solar Cells

Tuning the Intermolecular Electrostatic Interaction toward High‐Efficiency and Low‐Cost Organic Solar Cells

High-efficiency Organic Solar Cells with Low Voltage-Loss of 0.46 V

Ameliorated trap density and energetic disorder by strengthened intermolecular interaction strategy to construct efficient non-halogenated organic solar cells

Suppressed non-radiative loss and efficient hole transfer at a small highest occupied molecular orbital offset endows binary organic solar cells with 19.73% efficiency and a small efficiency-cost gap

Reduced exciton binding energy and diverse molecular stacking enable high-performance organic solar cells with VOC over 1.1 V

Optimizing binding energy and electron-hole pair binding distance for efficient organic solar cells with low voltage loss

Tuning Terminal Aromatics of Electron Acceptors to Achieve High-Efficiency Organic Solar Cells

Carboxylate substituted pyrazine: A simple and low-cost building block for novel wide bandgap polymer donor enables 15.3% efficiency in organic solar cells

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Efficient Cathode Buffer Material Based on Dibenzothiophene- S, S-dioxide for Both Conventional and Inverted Organic Solar Cells

Self‐Assembled Molecules with Asymmetric Backbone for Highly Stable Binary Organic Solar Cells with 19.7% Efficiency

Alkyloxime-Substituted Thiophene-Based Wide-Band-Gap Polymer Donor Achieving a High Short Circuit Current Density of 30 Ma Cm–2 in Organic Solar Cells

Fully Non‐Fused Ring Electron Acceptors Enable Effective Additive‐Free Organic Solar Cells with Enhanced Exciton Diffusion Length