Abstract:Three novel NFAs named BTP‐2O, BTP‐O‐S, and BTP‐2S with chalcogen containing branched chains are developed for efficient organic solar cells. The champion power conversion efficiency (PCE) reaches 17.3% for PM6:BTP‐O‐S‐based devices. Additionally, the o‐xylene processed PM6:BTP‐O‐S‐based devices also exhibit a PCE of 17.10%. This work demonstrates that the chalcogen containing branched chain engineering provides effective access to high‐performance OSCs by well‐balanced between VOC and JSC, alleviating voltage loss, and enhancing the FF. The elaborate balance between the open‐circuit voltage (VOC) and the short‐circuit current density (JSC) is critical to ensure efficient organic solar cells (OSCs). Herein, the chalcogen containing branched chain engineering is employed to address this dilemma. Three novel nonfullerene acceptors (NFAs), named BTP‐2O, BTP‐O‐S, and BTP‐2S, featuring different peripheral chalcogen containing branched chains are synthesized. Compared with symmetric BTP‐2O and BTP‐2S grafting two alkoxy or alkylthio branched chains, the asymmetric BTP‐O‐S grafting one alkoxy and one alkylthio branched chains shows mediate absorption range, applicable miscibility, and favorable crystallinity. Benefiting from the enhanced π–π stacking and charge transport, an optimal power conversion efficiency (PCE) of 17.3% is obtained for the PM6:BTP‐O‐S‐based devices, with a good balance between VOC (0.912 V) and JSC (24.5 mA cm−2), and a high fill factor (FF) of 0.775, which is much higher than those of BTP‐2O (16.1%) and BTP‐2S‐based (16.4%) devices. Such a result represents one of the highest efficiencies among the binary OSCs with VOC surpassing 0.9 V. Moreover, the BTP‐O‐S‐based devices fabricated by using green solvent yield a satisfactory PCE of 17.1%. This work highlights the synergistic effect of alkoxy and alkylthio branched chains for high‐performance OSCs by alleviating voltage loss and enhancing FF.

Reduced exciton binding energy and diverse molecular stacking enable high-performance organic solar cells with VOC over 1.1 V

Suppressed non-radiative loss and efficient hole transfer at a small highest occupied molecular orbital offset endows binary organic solar cells with 19.73% efficiency and a small efficiency-cost gap

Dithienobenzothiadiazole (DTBT)‐Based Polymers Enable Organic Solar Cells with Ultrahigh VOC of ∼1.3 V

Optimizing Molecular Crystallinity and Suppressing Electron‐Phonon Coupling in Completely Non‐fused Ring Electron Acceptors for Organic Solar Cells

High-efficiency Organic Solar Cells with Low Voltage-Loss of 0.46 V

Optimizing binding energy and electron-hole pair binding distance for efficient organic solar cells with low voltage loss

Efficient ternary organic solar cells enabled by asymmetric nonfullerene electron acceptor with suppressed nonradiative recombination

Loosely Bounded Exciton with Enhanced Delocalization Capability Boosting Efficiency of Organic Solar Cells.

Solution‐Processed Organic Solar Cells with High Open‐Circuit Voltage of 1.3 V and Low Non‐Radiative Voltage Loss of 0.16 V

Organic Solar Cells with Over 19% Efficiency Enabled by a 2D‐Conjugated Non‐fullerene Acceptor Featuring Favorable Electronic and Aggregation Structures

Efficient Organic Solar Cells with Extremely High Open‐Circuit Voltages and Low Voltage Losses by Suppressing Nonradiative Recombination Losses

Alkyloxime-Substituted Thiophene-Based Wide-Band-Gap Polymer Donor Achieving a High Short Circuit Current Density of 30 Ma Cm–2 in Organic Solar Cells

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

High performance and low cost organic solar cells based on pentacyclic A-DA'D-A acceptor with efficiency over 16%

The Effect of Chlorination and Position Isomerization of Benzotriazole-based Acceptors on High-Voltage Organic Solar Cells based on Dithienobenzodithiophene (DTBDT)-Containing Polymer Donor

High Open-Circuit Voltage Organic Solar Cells with 19.2% Efficiency Enabled by Synergistic Side-Chain Engineering

Binary Organic Solar Cells with over 19% Efficiency and Enhanced Morphology Stability Enabled by Asymmetric Acceptors

Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells

High‐Efficiency Organic Solar Cells with Reduced Nonradiative Voltage Loss Enabled by a Highly Emissive Narrow Bandgap Fused Ring Acceptor

High‐Efficiency Organic Solar Cells Enabled by Chalcogen Containing Branched Chain Engineering: Balancing Short‐Circuit Current and Open‐Circuit Voltage, Enhancing Fill Factor

Simple Non‐Fused Electron Acceptors Leading to Efficient Organic Photovoltaics