Abstract:In a context of growing concern for vehicle-related CO2 and pollutant emissions, non-conventional fuels like methanol (CH3OH) represent a valid alternative to fossil fuels to decarbonize the transport sector in a reasonable time. This is mainly due to its lower carbon content than conventional gasoline and diesel. Moreover, methanol can be obtained either from biomass or CO2 capture from the atmosphere, which makes the latter a renewable fuel. Given the possibility of being stored in liquid phase at standard temperature and pressure (STP), methanol is very suitable for Light Duty Vehicles (LDVs), in which the need to contain fuel tank dimensions is relevant. Regarding the deployment of methanol as a fuel, it is not very challenging, as it can be adopted in current production Internal Combustion Engines (ICEs) either in pure form or in blend with other fuels without any significant modifications.Within this context, the present work aims to assess, in both experimental and simulation environments, the benefits of pure methanol fueling of Spark Ignition (SI) engines. Particularly, a small single-cylinder production SI engine has been tested on the engine test bench at different speeds and air-fuel ratios, at unthrottled conditions. Besides the test campaign, a 1-D model of the engine under study has been developed, with a particular focus on the simulation of methanol combustion. Particularly, different correlations for the laminar flame speed, implemented in the combustion model, have been investigated to evaluate their effect on the prediction of performance, efficiency, and pollutant emissions. Combustion, heat transfer, and pollutant emissions sub-models have been tuned and validated based on the experimental data. Both experimental measurements and simulation results evidence that methanol fueling allows for improving engine efficiency, while reducing regulated pollutant emissions from a current production SI engine, if compared to conventional gasoline, especially under lean-burn operating conditions. This work is useful for future activities, which will concern the optimization of the Ignition Timing (IT), as well as the investigation of the knock tendency of methanol-fueled SI engines.

Development and validation of a phenomenological model for hydrogen fueled PFI internal combustion engines considering Thermo-Diffusive effects on flame speed propagation

Effect Of Piston Crevices On The Numerical Simulation Of A Heavy-Duty Diesel Engine Retrofitted To Natural-Gas Spark-Ignition Operation

Experimental Combustion Analysis in a Gasoline Baseline Hydrogen-Fueled Internal Combustion Engine at Ultra-Lean Conditions

Modeling of Hydrogen Combustion from a 0D/1D Analysis to Complete 3D-CFD Engine Simulations

Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions

High-Performance Hydrogen-Fueled Internal Combustion Engines: Feasibility Study and Optimization via 1D-CFD Modeling

Experimental and numerical investigation of a direct injection spark ignition hydrogen engine for heavy-duty applications

Experimental investigation of hydrogen combustion in a single cylinder PFI engine

A Transport Equation Residual Model Incorporating Refined G-Equation and Detailed Chemical Kinetics Combustion Models

Numerical characterization of hydrogen under-expanded jets with a focus on Internal Combustion Engines applications

Proposal and validation of a numerical framework for 3D-CFD in-cylinder simulations of hydrogen spark-ignition internal combustion engines

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Hydrogen direct injection: Optical investigation of premixed and jet-guided combustion modes

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Modeling and Experimental Validation of a Pure Methanol-Fueled Small SI Engine: Impact of the Laminar Flame Speed Correlation

A Numerical Exploration of Engine Combustion Using Toluene Reference Fuel and Hydrogen Mixtures

CFD analysis of hydrogen mixing and combustion in internal combustion engine: Evaluation of premixed and DI methods

Hydrogen, methane and one of their fuel blends combustion: CFD analysis and numerical-experimental comparisons of fixed and mobile applications

An experimental study of the detailed flame transport in a SI engine using simultaneous dual-plane OH-LIF and stereoscopic PIV

Thermal diffusion, exhaust gas recirculation and blending effects on lean premixed hydrogen flames

A Fractal-Based Quasi-Dimensional Combustion Model for SI Engines Fuelled by Hydrogen Enriched Compressed Natural Gas