Abstract:Compression ignition engines will still be predominant in the naval sector: their high efficiency, high torque, and heavy weight perfectly suit the demands and architecture of ships. Nevertheless, recent emission legislations impose limitations to the pollutant emissions levels in this sector as well. In addition to post-treatment systems, it is necessary to reduce some pollutant species, and, therefore, the study of combustion strategies and new fuels can represent valid paths for limiting environmental harmful emissions such as CO2. The use of methane in dual fuel mode has already been implemented on existent vessels, but the progressive decarbonization will lead to the utilization of carbon-neutral or carbon-free fuels such as, in the last case, hydrogen. Thanks to its high reactivity nature, it can be helpful in the reduction of exhaust CH4. On the contrary, together with the high temperatures achieved by its oxidation, hydrogen could cause uncontrolled ignition of the premixed charge and high emissions of NOx. As a matter of fact, a source of ignition is still necessary to have better control on the whole combustion development. To this end, an optimal and specific injection strategy can help to overcome all the before-mentioned issues. In this study, three-dimensional numerical simulations have been performed with the ANSYS Forte® software (version 19.2) in an 8.8 L dual fuel engine cylinder supplied with methane, hydrogen, or hydrogen–methane blends with reference to experimental tests from the literature. A new kinetic mechanism has been used for the description of diesel fuel surrogate oxidation with a set of reactions specifically addressed for the low temperatures together with the GRIMECH 3.0 for CH4 and H2. This kinetics scheme allowed for the adequate reproduction of the ignition timing for the various mixtures used. Preliminary calculations with a one-dimensional commercial code were performed to retrieve the initial conditions of CFD calculations in the cylinder. The used approach demonstrated to be quite a reliable tool to predict the performance of a marine engine working under dual fuel mode with hydrogen-based blends at medium load. As a result, the system modelling shows that using hydrogen as fuel in the engine can achieve the same performance as diesel/natural gas, but when hydrogen totally replaces methane, CO2 is decreased up to 54% at the expense of the increase of about 76% of NOx emissions.

A Numerical Exploration of Engine Combustion Using Toluene Reference Fuel and Hydrogen Mixtures

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Experimental Combustion Analysis in a Gasoline Baseline Hydrogen-Fueled Internal Combustion Engine at Ultra-Lean Conditions

Modeling of Hydrogen Combustion from a 0D/1D Analysis to Complete 3D-CFD Engine Simulations

Numerical characterization of hydrogen under-expanded jets with a focus on Internal Combustion Engines applications

Numerical Investigation of Combustion Characteristics of the Port Fuel Injection Hydrogen-Oxygen Internal Combustion Engine under the Low-Temperature Intake Condition

Numerical Investigation On The Combustion Process In A Spark-Ignited Engine Fueled With Hydrogen-Gasoline Blends

Hydrogen, methane and one of their fuel blends combustion: CFD analysis and numerical-experimental comparisons of fixed and mobile applications

CFD analysis of hydrogen mixing and combustion in internal combustion engine: Evaluation of premixed and DI methods

Numerical Investigation of Dual Fuel Combustion on a Compression Ignition Engine Fueled with Hydrogen/Natural Gas Blends

Experimental investigation of hydrogen combustion in a single cylinder PFI engine

Unsteady RANS simulations of under-expanded hydrogen jets for internal combustion engines

3D CFD analysis of Mixture Formation in Direct-Injection Hydrogen-fueled Internal Combustion Engines

Analysis of the Particulate Emissions and Combustion Performance of A Direct Injection Spark Ignition Engine Using Hydrogen and Gasoline Mixtures

Numerical Study of Combustion and Emission Characteristics for Hydrogen Mixed Fuel in the Methane-Fueled Gas Turbine Combustor

Numerical Analysis of Dual Fuel Combustion in a Medium Speed Marine Engine Supplied with Methane/Hydrogen Blends

Computational study of hydrogen engine combustion strategies: Dual-Fuel compression ignition with Port- and Direct-Injection, Pre-Chamber Combustion, and Spark-Ignition

Numerical Investigation on the Effects of Load Conditions and Hydrogen-Air Ratio on the Combustion Processes of a HSDI Engine

Computational Study of Hydrogen Direct Injection for Internal Combustion Engines

Numerical Investigation of the Effects of Hydrogen Enrichment on Combustion and Emissions Formation Processes in a Gasoline Rotary Engine

Proposal and validation of a numerical framework for 3D-CFD in-cylinder simulations of hydrogen spark-ignition internal combustion engines