Abstract:Mechanical behaviour of twenty-eight longitudinal lap-welded joints made of high strength steels (HSS) under tension load was investigated by experimental and numerical study. Weaknesses due to traditional deformation measurements for fillet welded joints can be perfectly solved by digital image correlation techniques (DIC). Distribution and development of strain field throughout the specimens along the whole loading process were recorded by DIC measurement. The effect of parameters (e.g. weld size, weld length and mismatch ratio) on mechanical properties (e.g. ultimate strength, failure modes, weld ductility and fracture angle) of longitudinal fillet welds and transverse fillet welds, which was introduced in detail in previous work by the authors, were compared. Generally, because of the difference on the combination of shear force and tension force, the fracture angle of longitudinal welded specimens (around <math>50∘</math>) were much more divergent from transverse welded specimens (around <math>20∘</math>) even though both of them failed at welded zone (welded zone only refers to weld metal in this paper), resulting that the mean strength of longitudinal welded specimens were only 0.58 time of transverse welded specimens. Conversely, the mean deformation capacity of longitudinal welded specimens was almost 4.0 times of transverse welded specimens. All longitudinal welded specimens have "platform" or "decline" feature while all transverse welded specimens have "rise" or "platform" feature load-deformation curves. Generally, the specimens with "rise" feature load-deformation curve are more likely to suffer sudden fracture, while specimens with "decline" or "platform" feature have satisfactory ductility performance. Based on the strain distribution and development features provided by DIC measurement, a new strength criterion, in which the ultimate strain obtained in relevant coupon tests was an indicator, was proposed and through the comparison between the numerical results and test results, its validation was verified by FE simulation. Moreover, it was confirmed that the predicted loads of EC3 and AISC Specification were close and slightly conservative for all specimens.

Experimental study on the strength and fracture behaviour of fillet welded joints made of high strength steel under multiple loading angles

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

A study of local mechanical properties of 304L SS welded joints subjected to cyclic straining using depth-sensing instrumented indentation

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Fracture prediction in transverse fillet welded joints of high strength structural steel

Investigation on the ductile fracture behavior of Q460 steel fillet welded joints based on micro-mechanics

Investigation on Fatigue Behaviour of Load-Carrying Fillet Welded Joints Based on Mix-Mode Crack Propagation Analysis

An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds

Study on Fatigue Behavior and Crack Propagation Life of Longitudinal Fillet Welded Lap Joint

Investigation of the Fracture Behavior of High-Strength Structural Steel and Welds Based on Micromechanical Models

A State of the Art Review of Fillet Welded Joints

Experimental and Numerical Investigation on Fatigue Performance of Non-Load-carrying Fillet Welded Joints

INVESTIGATION ON HIGH STRENGTH STEEL WELDED CONNECTIONS

Fatigue life assessment of Q345 steel fillet welded joints with competitive failure modes

Insights into microstructure evolution and fracture mechanisms of welded joints of high strength steel patchwork components

Evolution of in-plane stresses induced fracture behaviors of Tailor Welded Blanks subjected to non-uniformly distributed load

Experimental study on fracture toughness of high-strength structural steel and its butt weld

Experimental Investigation On The Microstructure And Mechanical Properties Of Dss2205 And Ss304L Dissimilar Weldments

Study on micromechanical fracture models of structural steel and its welds

Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams