Abstract:Conventional silicon photomultipliers (SiPMs) are well established as light detectors with single-photon-detection capability and used throughout high energy physics, medical, and commercial applications. The possibility to produce single photon avalanche diodes (SPADs) in commercial CMOS processes creates the opportunity to combine a matrix of SPADs and an application-specific integrated circuit in the same die. The potential of such digital SiPMs (dSiPMs) is still being explored, while it already is an established technology in certain applications, like light detection and ranging (LiDAR). A prototype dSiPM, produced in the LFoundry 150-nm CMOS technology, was designed and tested at DESY. The dSiPM central part is a matrix of 32 by 32 pixels. Each pixel contains four SPADs, a digital front-end, and has an area of 69.6 $\times$ 76 um$^2$. The chip has four time-to-digital converters and includes further circuitry for data serialization and data links. This work focuses on the characterization of the prototype in an electron beam at the DESY II Test Beam facility, to study its capability as a tracking and timing detector for minimum ionizing particles (MIPs). The MIP detection efficiency is found to be dominated by the fill factor and on the order of 31 %. The position of the impinging MIPs can be measured with a precision of about 20 um, and the time of the interaction can be measured with a precision better than 50 ps for about 85 % of the detected events. In addition, laboratory studies on the breakdown voltage, dark count rate, and crosstalk probability, as well as the experimental methods required for the characterization of such a sensor type in a particle beam are presented.

Status and R & D of ASHIPH-SiPM option for PID

A Novel High Dynamic-Range SiPM for Scintillator-Based Hadronic Calorimetry

A New Compact Position-Sensitive PMT for Scintillation Detectors

Position sensitive SiPM detector for Cherenkov applications

Design and Performance of SiPM-based Readout of PbF2 Crystals for High-Rate, Precision Timing Applications

A Compact Start Time Counter Using Plastic Scintillators Readout with MPPC Arrays for the WASA-FRS HypHI Experiment

Scintillator-SiPM Detector for Tracking and Energy Deposition Measurements

Test Beam Characterization of a Digital Silicon Photomultiplier

Study of detection efficiency distribution and areal homogeneity of SiPMs

Portable neutron/gamma scintillation detector for status monitoring of accelerator-driven neutron source IREN

A Compact Spectrometer for Heavy Ion Experiments in the Fermi Energy Regime

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Compact Back-End Electronics with Temperature Compensation and Efficient Data Management for In Situ SiPM-Based Radiation Detection

Study of SiPM for CEPC-AHCAL

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

A study of the latest updates of the readout system for the hybird-pixel detector at HEPS

A readout system based on SiPM for the dRICH detector at the EIC

New liquid scintillation counter development using Silicon Photomultipliers

Lifetime and performance of the very latest microchannel-plate photomultipliers

SiPM Cross-Talk in Liquid Argon Detectors

Replacement of a Photomultiplier Tube with Silicon Photomultipliers for use in Safeguards Applications