Abstract:In traditional Japanese smelting and forging, three characteristic technologies can be identified that may provide a basis for a new process concept in the production of iron and steel. First, ironsand, the use of which is problematic in modern ironmaking, was used instead of ironstone. The titanium oxide present was effective for keeping the slag fluid and increasing the carbon content of the product, thereby decreasing the activity coefficient of FeO in the slag. Second, two types of operation were carried out with almost the same type of furnace. In one of the operations, mainly molten pig iron was produced and, in the other, steel bloom (>50 wt-% of total product) and molten pig iron. The main controlling factors were the type of raw material (titanium content of ironsand) and the oxidising potential in the furnace, which influenced the degree of carburisation and decarburisation of the iron. Third, it is thought that traditional Japanese steel is the best material for Japanese swordmaking. This was confirmed by an experiment with different materials. In the case of traditional Japanese steel, both the homogeneity of the carbon distribution and the inclusion content in the original material can be improved by the forging process, since the degree of contamination during forging is less. With modern steel, weldability in forging is adversely affected by contamination during forging. This means that the complex combination of material and total process is important for producing the particular product.

On the secondary cooling control technology for the continuous casting-direct rolling process

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

Design and implementation of an automated secondary cooling system for the continuous casting of billets

Study on Control Characteristics of Secondary Cooling System in Continuous Casting

Optimization for Secondary Cooling Parameters in Continuous Casting of High Carbon Chromium Bearing Steel

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Emulation of Dynamic Secondary Cooling and Soft Reduction in Continuous Slab Casting

Characterization and Control of Secondary Phase Precipitation of Nb-V-Ti Microalloyed Steel during Continuous Casting Process

Dynamic Secondary Cooling of Continiuous Slab Casting by Incremental PID Control

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Application of Process Simulation Software on Secondary Cooling Optimization for Continuous Caster

Simulation of Subrapid Solidification and Secondary Cooling for the Strip Casting of IF Steel

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Progress in thermomechanical control of steel plates and their commercialization

End-point Temperature Preset of Molten Steel in the Final Refining Unit Based on an Integration of Deep Neural Network and Multi-process Operation Simulation

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

Hot Cracking of Low Alloy Steels in Simulated Continuous Casting-Direct Rolling Process

Control of slag and inclusions in traditional Japanese iron- and steelmaking

Research on dynamic secondary cooling control model for slab continuous casting machine with high casting speed

Secondary Cooling Design for Slab Caster Based on Transient Heat Transfer Module