Abstract:Gasification, a highly efficient method, is under extensive investigation due to its potential to convert biomass and plastic waste into eco-friendly energy sources and valuable fuels. Nevertheless, there exists a gap in comprehension regarding the integrated thermochemical process of polystyrene (PS) and polypropylene (PP) and its capability to produce hydrogen (H 2 ) fuel. In this study a comprehensive process simulation using a quasi-equilibrium approach based on minimizing Gibbs free energy has been introduced. To enhance H 2 content, a water-gas shift (WGS) reactor and a pressure swing adsorption (PSA) unit were integrated for effective H 2 separation, increasing H 2 production to 27.81 kg/h. To investigate the operating conditions on the process the effects of three key variables in a gasification reactor namely gasification temperature, feedstock flow rate and gasification pressure have been explored using sensitivity analysis. Furthermore, several machine learning models have been utilized to discover and optimize maximum capacity of the process for H 2 production. The sensitivity analysis reveals that elevating the gasification temperature from 500 °C to 1200 °C results in higher production of H 2 up to 23 % and carbon monoxide (CO). However, generating H 2 above 900 °C does not lead to a significant upturn in process capacity. Conversely, an increase in pressure within the gasification reactor is shown to decrease the system capacity for generating both H 2 and CO. Moreover, increasing the mass flow rate of the gasifying agent to 250 kg/h in the gasification reactor has shown to be merely productive in process capacity for H 2 generation, almost a 5 % increase. Regarding pressure, the hydrogen yield decreases from 22.64 % to 17.4 % with an increase in pressure from 1 to 10 bar. It has been also revealed that gasification temperature has more predominant effect on Cold gas efficiency (CGE) compared to gasification pressure and Highest CGE Has been shown by PP at 1200 °C. Among the various machine learning models, Random Forest (RF) model demonstrates robust performance, achieving R 2 values exceeding 0.99.

Machine learning facilitated the modeling of plastics hydrothermal pretreatment toward constructing an on-ship marine litter-to-methanol plant

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Applied machine learning for prediction of waste plastic pyrolysis towards valuable fuel and chemicals production

Automated machine learning-aided prediction and interpretation of gaseous by-products from the hydrothermal liquefaction of biomass

Machine learning for hydrothermal treatment of biomass: A review

A novel intelligent system based on machine learning for hydrochar multi-target prediction from the hydrothermal carbonization of biomass

Machine learning-aided hydrothermal carbonization of biomass for coal-like hydrochar production: Parameters optimization and experimental verification

Fuel Properties of Hydrochar and Pyrochar: Prediction and Exploration with Machine Learning

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Hydrothermal Liquefaction of Plastics: a survey of the effect of reaction conditions on the reaction efficiency.

Machine learning-aided unveiling the relationship between chemical pretreatment and methane production of lignocellulosic waste

Multi-task prediction and optimization of hydrochar properties from high-moisture municipal solid waste: Application of machine learning on waste-to-resource

Understanding and Optimizing the Gasification of Biomass Waste with Machine Learning

Accelerating Integrated Prediction, Analysis and Targeted Optimization for Anaerobic Digestion of Biomass after Hydrothermal Pretreatment Using Automated Machine Learning

Techno-economic analysis and life cycle assessment of mixed plastic waste gasification for production of methanol and hydrogen

Machine learning predicting wastewater properties of the aqueous phase derived from hydrothermal treatment of biomass

Machine learning for municipal sludge recycling by thermochemical conversion towards sustainability

Enhanced biomethanization of waste polylactic acid plastic by mild hydrothermal pretreatment: Taguchi orthogonal optimization and kinetics modeling

Mineralizing Biofilm towards Sustainable Conversion of Plastic Wastes to Hydrogen

Machine learning-based characterization of hydrochar from biomass: Implications for sustainable energy and material production

Recent advances in plastic waste pyrolysis for liquid fuel production: Critical factors and machine learning applications