Abstract:A series of poly(1,3-trimethylene carbonate-b-(l-lactide-ran-glycolide)) (PTLG) with the three-armed PDLA and PLLA stereoblock copolymer (sc-PLA) acting as the nucleating agent was prepared via the solution-casting method. The effects of the incorporation of various amounts of sc-PLA crystallites on the crystallization behavior and mechanical properties of the PTLG matrix were characterized via DSC, WAXD, POM, and mechanical measurements. The results exhibited that the sc-PLA crystallites obviously enhanced the crystallization rate of the PLLA segments in the PTLG matrix. The results from the investigation of non-isothermal crystallization behavior showed that the crystallization process was significantly accelerated with the sc-PLA crystallites, and with an increase in the content of sc-PLA crystallites, the crystallization temperature shifted to 123.5 degrees C compared to that of the pure PTLG matrix. The results from the isothermal crystallization behavior study showed that the relative degree of crystallinity (X-t) gave a typical S-shape curve and the half-time of crystallization (t(0.5)) decreased with an increase in the amount of added sc-PLA crystallites. The crystallization accelerating effects mainly depended on the preeminent nucleation ability of the sc-PLA crystallites, which was proven by POM measurement. The mechanical measurement results showed that with the introduction of sc-PLA crystallites, the tensile strength of the blends was remarkably improved from 21.1 to 85.8 MPa. Furthermore, the biocompatibility of PTLG/sc-PLA was evaluated using the CCK-8 assay and live/dead staining. The results indicated that PTLG/sc-PLA presented very low cytotoxicity. Therefore, the low crystallization rate of the PLLA segments in the PTLG matrix can be largely improved by using sc-PLA crystallites as nucleating agents, and PTLG/sc-PLA blends possess good cytocompatibility and are expected to be used as bioresorbable vascular stents in the bio-medical field.

Effects on the crystallization behavior and biocompatibility of poly(LLA-ran-PDO-ran-GA) with poly( d -lactide) as nucleating agents

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Enhancement of the crystallization and biocompatibility of poly(TMC-b-(LLA-ran-GA)) by poly(lactide) stereocomplex

Enhancing Crystallization Behavior for Optimized Performances of Poly(tmc‐b‐(lla‐ran‐ga)) by PDLA/PLLA Stereocomplex Crystallization

Enhanced Crystallization Rate and Mechanical Properties of Poly(l‐lactic Acid) by Stereocomplexation with Four‐armed Poly(ϵ‐caprolactone)‐block‐poly(d‐lactic Acid) Diblock Copolymer

Enhancement of the crystallization and biocompatibility of poly(TMC-<i>b</i>-(LLA-<i>ran</i>-GA)) by poly(lactide) stereocomplex

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior.

Influence of poly(lactide) stereocomplexes as nucleating agents on the crystallization behavior of poly(lactide)s

Synergistic effect of star‐shaped architecture and polyethylene glycol moieties on poly (lactic acid) stereocomplex crystallization behaviors

The Accelerating Effect of the Star-Shaped Poly(d-Lactide)-block-poly(l-lactide) Stereoblock Copolymer on PLLA Melt Crystallization

Polymorphic Crystallization and Crystalline Reorganization of Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Mixture Influenced by Blending with Poly(vinylidene fluoride)

Effect of molecular weight of polyethylene glycol on crystallization behaviors, thermal properties and tensile performance of polylactic acid stereocomplexes

Effect of POSS-NH2-grafted different plasticizers on the crystallization properties of SC-Poly (l-lactic acid)

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

Relationship between the Stereocomplex Crystallization Behavior and Mechanical Properties of PLLA/PDLA Blends

Effect of stereo-complexation on crystallization behavior and barrier properties of poly-lactide

Toward Exclusive Stereocomplex Crystallization of High-Molecular-weight Poly(l-Lactic Acid)/poly(d-Lactic Acid) Blends with Outstanding Heat Resistance Via Incorporating Selective Nucleating Agents.

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide