Abstract:Near-bed flows in rough-bed open-channels are of relevance to river engineering, freshwater ecology and hydraulic design. Detailed measurements of near-bed flow velocity and turbulence distributions are rarely available. This paper aims to improve our understanding of near-bed flow characteristics. We performed experiments of turbulent open-channel flow over roughness elements, and made fine-scale measurements of three-dimensional velocity and turbulence quantities, using an acoustic Doppler velocimeter. The experiments allowed for the d-type, the intermediate-type and the k-type of surface roughness. The fine scale measurements covered the entire flow region in the bed vicinity, including cavities below the crests of roughness elements. Below the crests, the longitudinal velocity field displays one weak eddy in the cavity between adjacent elements for the d-type of roughness, two eddies of different strengths for the intermediate-type of roughness, and boundary-layer velocity structures for the k-type of roughness. Above the crests, the main (or longitudinal) flow velocity shows a variety of vertical structures for the three types of surface roughness. At the elevation equal to one half the roughness height above the crests, there is a lack of longitudinal variations in the main flow velocity over the length of element—cavity sequence. In other words, main-flow velocity fluctuations are small; the velocity distributions have a standard deviation equal to 5%, 6% and 7% of their mean values for the d-type, the intermediate-type, and the k-type of roughness, respectively. Practically the influence of roughness surface may be considered as capped at that elevation. The secondary flow has the highest intensity nearest the bed. Turbulence shear has the highest average value at the crest level of roughness elements.

A laboratory study of internal gravity waves incident upon slopes with varying surface roughness

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Experimental Study of the Lock-Release Gravity Current Propagates on a Rough Upslope

Laboratory Investigation of Turbulent Dissipation in an Internal Solitary Wave Breaking over a Submerged Gaussian Ridge

ISW Encountered with Rough Shelf Slope in Experimental Flume

Hydrodynamic roughness induced by a multiscale topography

Near-bed velocity and shear stress of open-channel flow over surface roughness

Numerical Investigation of Rayleigh-wave Propagation on Topography Surface

Hexagonal roughness characterization in turbulent flow

Understanding the Role of Sharp Edges in the Propagation of Surface Gravity Waves

Effects of Distributed Roughness on Crossflow Instability through Generalized Resonance Mechanisms

Study on Internal Waves Generated by Tidal Flow over Critical Topography

On the Mean Flow Behaviour in the Presence of Regional-Scale Surface Roughness Heterogeneity

A depth‐averaged description of submarine avalanche flows and induced surface waves

Effect of Surface Roughness Geometry on Boundary-Layer Transition and Far-Field Noise

Investigation of the Initiation of Shallow Failure in Widely Graded Loose Soil Slopes Considering Interstitial Flow and Surface Runoff

Experimental study of a turbulent boundary layer with a rough-to-smooth change in surface conditions at high Reynolds numbers

The role of roughness geometry in frictional wave dissipation

Surface Roughness and Effective Stick-Slip Motion

Turbulent/Synoptic Separation and Coherent Structures in the Atmospheric Surface Layer for a Range of Surface Roughness

Roughness characteristics of an ice surface grown in the presence of a supercooled water film driven by gravity and wind drag