Abstract:In this study, we carried out a series of physical experiments using a submersed flume model to investigate how sand/clay content influences the depositional mechanism of submarine debris flows. A three-dimensional biphasic numerical model, with a Herschel-Bulkley rheology, was used to back-analyze the physical experiments. The calibrated numerical model was then used in a back-calculation to investigate the effects of viscosity on the deposition process. The results show that as submarine debris flows mix with water during the deposition process, shear stress at the slurry-water interface generates a vortex that leads to a swirl-wedge front head. High-viscosity slurry flows with a swirl-wedge front head travel at a higher aspect ratio and with a greater radius of rotation. Hydroplaning was observed when the front head was lifted by water during flow. The lifting height increased with flow depth fluctuation. Higher viscosity slurry was found to lift more rapidly due to its larger vortex and the decrease in density at the front head over time, both of which promote fluctuation. Although a high-density slurry has a greater lifting height, the ratio of lifting height to front head height is lower, indicating a smaller lifting force influence. Lower density flows have higher kinetic energy as the transfer of potential energy into kinetic energy is more efficient. Kinetic energy dissipation comprises three stages: (1) gravity-dominated coherent flow and hydroplaning lead to a rapid increase in kinetic energy; (2) sharp reduction in kinetic energy as slurry mixes with water, coherence and hydroplaning are reduced, and the influence of the shear stress increases; (3) slurry mixed very well with water, turbidity current dominates the kinetic energy dissipation. High-density slurry dissipates quicker in the last two stages. In stage 3, which dominates the temporal evolution of the debris flow, the Froude number is lower than 1, the flow thins and elongates, and the deposition process of submarine debris flows is dominated by gravity, and the difference of morphology of the different cases become clear.

A depth‐averaged description of submarine avalanche flows and induced surface waves

Depth-Averaged Two-Dimensional Model of Unsteady Flow and Sediment Transport Due to Noncohesive Embankment Break/Breaching

A Depth-Averaged 2-D Model of Non-Cohesive Dam/Levee Breach Processes

Numerical simulation of submarine landslide tsunamis based on the smoothed particle hydrodynamics model

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

Improved Modeling of Subaerial and Subaqueous Muddy Debris Flows

Depth integrated modelling of submarine landslide evolution

Granular Flows in Fluid

A General Numerical Model for Surface Waves Generated by Granular Material Intruding into a Water Body

Numerical Study for Water Waves Generated by Debris Flow

Depth-averaged mixture model for development processes of debris flows over a steep unsaturated mobile bed

Gravity-capillary Waves Modulated by Linear Shear Flow in Arbitrary Water Depth

A mass transfer-based LES modelling methodology for analyzing the movement of submarine sediment flows with extensive shear behavior

Investigating the effects of clay/sand content on depositional mechanisms of submarine debris flows through physical and numerical modeling

Boussinesq modeling of surface waves due to underwater landslides

A non-hydrostatic model for the numerical study of landslide-generated waves

Modelling of Avalanche-Obstacle Interaction Using the Depth-Averaged Continuum Approach

Development of a Mathematical Model for Submarine Granular Flows

Simulating shallow morphodynamic flows on evolving topographies

Dispersive waves generated by an underwater landslide

Failure mechanism of submarine slopes based on the wave flume test