Abstract:The mismatch of capacity and electrochemical reaction kinetics between capacitor-type and battery-type electrodes caused by the charge-storage mechanism hinders the development of lithium-ion capacitors (LICs). To relieve the above contradiction, a 3D interconnected nitrogen-doped ultrathin carbon (3DNC) framework encapsulated with Fe2O3 (2O3-700) was prepared and applied as the anode and cathode to fabricate symmetric LICs. The 3DNC framework can provide a stable structure, short electron transport length, and abundant active sites. Besides, the encapsulated nanoparticles (NPs) can enhance the capacity of the anode and, meanwhile, maintain the excellent cycling performance owing to the relatively strong interaction and abundant interface between 3DNC and Fe2O3 NPs. Benefiting from the unique properties, 2O3-700 anode exhibits a capacity of 946.6 mA h g–1 and a retention rate of 106.5% after 5000 cycles. 2O3-700 cathode displays a capacity of 82.1 mA h g–1 and a retention rate of 100% after 5000 cycles. 2O3-700//2O3-700 LICs show a superior performance of high energy density of 206 W h kg–1 at 226 W kg–1 and a capacity retention of 118.2% after 5000 cycles at 1 A g–1. This work may provide a route to relieve the mismatch between the anode and cathode for high-performance symmetric LICs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c03954.Material characterization and electrochemical measurement, schematic illustration of gas-phase coating, Raman and detailed XPS spectra of 2O3-X; elemental analysis results of 2O3-X; CV curves, charge–discharge curves, GITT curves, and DLi+ of 2O3-650 and 2O3-750 anode; CV curves and charge–discharge curves of 2O3-700 and 2O3-750 cathode; rate performance of 2O3-X anode and cathode; equivalent circuit of 2O3-X anode and cathode; capacity of 2O3-700 anode and cathode compared with the previously reported carbon anode and cathode used for LICs; Rs and Rct values of 2O3-X anode and cathode by the equivalent circuit; CV curves, charge–discharge curves and Ragone plot of 2O3-700//2O3-700 LICs at different mass ratios of cathode and anode; electrochemistry performance of 2O3-700//2O3-700 LICs compared with the previously reported LICs (PDF)This article has not yet been cited by other publications.

High-Performance Lithium-Ion Capacitors Based on 3D Interconnected Nitrogen-Doped Ultrathin Carbon Frameworks with Encapsulated Fe 2 O 3 Nanoparticles

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Elevating the Comprehensive Performance of Carbon-Based Hybrid Electrode Materials by Incorporating Nickel Silicate for Lithium-Ion Capacitors

Encapsulating V2O3 Nanoparticles in Carbon Nanofibers with Internal Void Spaces for a Self-Supported Anode Material in Superior Lithium-Ion Capacitors

Co3O4 porous nanorod/N-doped reduced graphene oxide composite with fast pseudocapacitive lithium storage for high-performance lithium-ion capacitors

A Superior Lithium-Ion Capacitor Based on Ultrafine MnO/Dual N-Doped Carbon Anode and Porous Carbon Cathode

Zn/Co Bimetallic Metal-Organic Framework Derived Carbon Anode with Enchanted Rate Capability for Lithium-Ion Capacitors

In-Situ High Level Nitrogen Doping into Carbon Nanospheres Boosting Capacitive Charge Storage as Both Anode and Cathode for A High-Energy 4.5 V Full Carbon Lithium Ion Capacitor.

Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors

High-performance Li-ion Capacitor Based on Black-Tio 2-X /graphene Aerogel Anode and Biomass-Derived Microporous Carbon Cathode

High-Performance Lithium-Ion Capacitors Produced by Atom-Thick Carbon Cathode and Nitrogen-Doped Porous Carbon Anode

Designing in-situ carbon-coated mixed phase Iron Oxides anode coupled with a heteroatom doped porous carbon cathode for Lithium-ion capacitors

A High-Rate and Ultrastable Anode Enabled by Boron-Doped Nanoporous Carbon Spheres for High-Power and Long Life Lithium Ion Capacitors

High-Energy and High-Power Nonaqueous Lithium-Ion Capacitors Based on Polypyrrole/Carbon Nanotube Composites As Pseudocapacitive Cathodes

Iron oxide encapsulated in nitrogen-rich carbon enabling high-performance lithium-ion capacitor

Realizing high-performance and low-cost lithium-ion capacitor by regulating kinetic matching between ternary nickel cobalt phosphate microspheres anode with ultralong-life and super-rate performance and watermelon peel biomass-derived carbon cathode

Hierarchical architecture of ZIF-8@ZIF-67-Derived N-doped carbon nanotube hollow polyhedron supported on 2D Ti3C2Tx nanosheets targeting enhanced lithium-ion capacitors

Toward high energy-density and long cycling-lifespan lithium ion capacitors: a 3D carbon modified low-potential Li2TiSiO5 anode coupled with a lignin-derived activated carbon cathode

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Dual-functionally modified N/S doped hierarchical porous carbon and glycerol-engineered polyacrylonitrile carbon nanofibers combine for high-performance lithium-ion capacitors

Nitrogen-Doped Carbonized Polyimide Microsphere As A Novel Anode Material for High Performance Lithium Ion Capacitors