Abstract:In many industrial applications, heat loads management requires the design and production of compact heat exchangers which are expected to handle high thermal loads with acceptable pressure losses, while assuring good mechanical performances. These challenging targets can be achieved by filling the cavities where the cool/hot fluid circulates with lattice structures promoting the heat exchange between the fluid and the cavity boundaries. Such lattice structures can be only produced through Additive Manufacturing due to their high geometric complexity. Recent experimental investigations proved the effectiveness of some kinds of lattice structures having a circular cross section. Here the aerothermal behaviour of Body-Centred Cubic (BCC) lattice stagger arrays in a rectangular channel was experimentally investigated by considerably extending the previous studies to higher Reynolds numbers (up to 30′000) and to new types of lattice structures. Specifically, three new BCC structures having a cam-like, drop-like and elliptical cross section were explored in this work and compared against those having circular cross section. All the samples were manufactured by means of Laser Powder Bed Fusion and made from AlSi10Mg. At first, the heat exchangers were comprehensively characterized by means of optical non-destructive methods. Successively they were tested in a dedicated rig by imposing constant heat flux boundary conditions. The characteristics of the transitional or fully turbulent approaching flow to the test section are also reported thanks to dedicated flow field measurements performed by Particle Image Velocimetry. According to the obtained results, the BCC structure with the circular cross section of larger diameter is the most effective in terms of heat transfer, although it is largely penalized by the pressure losses. Similar heat transfer performances were achieved by the tapered cross section of elliptical shape with the advantage of a considerably lower friction factor. Pressure losses resulted almost identical for all the tapered cross sections but lower than those of the circular one having an equal frontal dimension. When considering the thermal performance factor the circular shape becomes unfavourable for Re >20′000, while the elliptical cross section is the best choice to efficiently promote heat transfer up to Re =30′000.

Mitigation effects of Body-Centered Cubic Lattices on the heat transfer deterioration of supercritical CO2

Impact of Conjugate Heat Transfer on the Turbulence and Heat Transfer in an Upward Heated Pipe Flow at Supercritical Pressure

Experimental study on heat transfer deterioration of supercritical CO2 in a round tube:A boundary assessment

Numerical Study on the Heat Transfer Deterioration and Its Mitigations for Supercritical CO2 Flowing in a Horizontal Miniature Tube

Experimental and numerical investigation on the mechanisms of novel heat transfer deterioration of supercritical CO 2 in vertical tubes

Numerical Study on Flow Structure and Heat Transfer of Supercritical CO2 in Tubes with Different Inclination Angles

Numerical study on the heat transfer deterioration of supercritical CO 2 in straight tubes under different inclination angle

Numerical Study on the Gravity Effect on Heat Transfer of Supercritical CO2 in a Vertical Tube

Numerical investigation on cooling heat transfer and flow characteristics of supercritical CO2 in spirally fluted tube at various inclination angles

Effects of Heater Orientations on the Natural Circulation and Heat Transfer in A Supercritical Co2 Rectangular Loop

Experimental investigation of the effects of transverse vibration on the supercritical CO 2 heat transfer characteristics in horizontal tubes

Investigation of Buoyancy-Enhanced Heat Transfer of Supercritical CO2 in Upward and Downward Tube Flows

Numerical Simulation of Convection Heat Transfer for CO_2 at Supercritical Pressure in Vertical Circular Tube

Experimental Investigation on Cooling Heat Transfer and Buoyancy Effect of Supercritical Carbon Dioxide in Horizontal and Vertical Micro-Channels

Experimental Study on Suppressing Heat Transfer Deterioration of Supercritical CO2 in Vertical Tubes Based on Helmholtz Oscillator

A novel structure tube for supercritical CO 2 turbulent flow with high non-uniform heat flux

Effects of different cross-sections of Body Centered Cubic cells on pressure drop and heat transfer of additively manufactured heat sinks

Investigation And Modeling Of The In-Tube Heat Transfer Of Fluids At Supercritical Pressure During Heating

Study of Forced Convection Heat Transfer of Supercritical Co2 in A Horizontal Channel by Lattice Boltzmann Method

Comparison and evaluation of supercritical CO2 cooling performance in horizontal tubes with variable cross‐section by field synergy theory

Comparing endwall heat transfer among staggered pin fin, Kagome and body centered cubic arrays