Abstract:Efficient mechanical energy harvesting using the principle of piezoelectric effect demands specific material-property requirements. This includes a combination of large piezoelectric charge coefficient (dij), large elastic strain ({\epsilon}y), small elastic compliance (Sij), and small dielectric permittivity (\k{appa}ij). The present work undertakes structural, electrical, mechanical, and electromechanical characterization of pyrochlore-free lead magnesium niobate-lead titanate (1-x)[Pb(Mg(1/3)Nb(2/3)O3)]-xPbTiO3 at x = 0.3 or PMN-0.3PT, to estimate the above critical parameters for mechanical energy harvesting. Pyrochlore-free PMN-0.3PT ceramic with co-existing monoclinic (Pm and Cm) phases was synthesized using solid-state reaction method. Piezoelectric charge coefficient (d33), dielectric permittivity (\k{appa}33^T), elastic compliance (s33^E), and electromechanical coupling factor (k33), were estimated to be, 200 pC/N (approx), 1.06 (approx) x 10^-8 F/m, 13.16 (approx) x 10^-12 m2/N, and 0.54 (approx), respectively, using room temperature impedance measurement on a poled sample with specified dimensions (EN 50324-1:2002 and CEI/IEC 60483:1976). Polarization leakage due to transport of various charged defects was identified to be responsible for the reduced electromechanical properties compared to those reported for single crystals. Elastic strain ({\epsilon}y) vis-à-vis flexibility (fFOM) of the PMN-0.3PT was estimated to be 4.5 x 10-4. Energy harvesting under dynamic mechanical loading shows a maximum short-circuit current density, 95 nA/cm2, and an open-circuit electric field, 98 V/cm. With its impressive performance, PMN-0.3PT ceramic constitutes an important material for piezoelectric energy harvesting.

Enhanced energy harvesting performance of PIN-PMN-PT single crystal unimorph using alternating current poling

Investigation of Properites of PIN-PMN-PT Single Crystal and Its High Performance Application for a Piezoelectric Energy Harvester

Enhanced Transverse Piezoelectric Properties by Composition and Poling Electric Field Induced Phase Transition in PIN–PMN–PT Single Crystal Near Morphotropic Phase Boundary

Enhanced piezoelectric properties and domain morphology under alternating current electric field poled in [001]-oriented PIN-PMN-PT single crystal

Optimizing the Piezoelectric Vibration of Pb(Mg1/3Nb2/3)O3-0.25PbTiO3 Single Crystal by Alternating Current Polarization for Ultrasonic Transducer

High output power density of a shear-mode piezoelectric energy harvester based on Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals

Growth and Enhanced Electrical Properties of PIN-PMN-PT Piezoelectric Single Crystal Grown by the Solid-State Crystal Growth Method

A Plastic-Composite-plastic Structure High Performance Flexible Energy Harvester Based on PIN-PMN-PT Single Crystal/epoxy 2-2 Composite

Development of High Performance Piezoelectric D33 Mode MEMS Vibration Energy Harvester Based on PMN-PT Single Crystal Thick Film

High Output Power Density and Strong Vibration Durability in a Modified Barbell-Shaped Energy Harvester Based on Multilayer Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 Single Crystals

Experimental and analytical parametric study of single-crystal unimorph beams for vibration energy harvesting

Enhanced Electromechanical Properties in Pmn-Pt Based 1-3 Piezoelectric Composites by Ac Poling Method

Piezoelectric MEMS Low-Level Vibration Energy Harvester with PMN-PT Single Crystal Cantilever

Enhanced Energy Harvesting Performance Of The Piezoelectric Unimorph With Perpendicular Electrodes

Structural and electromechanical characterization of lead magnesium niobate-lead titanate (PMN-0.3PT) piezoceramic for energy harvesting applications

Enhanced piezoelectrical properties of Pb(Zn1/3Nb2/3)O3 - PbTiO3 single crystals by AC poling

High output power density and strong vibration durability in a modified barbell-shaped energy harvester based on multilayer Pb(In 1/2 Nb 1/2 )O 3 –Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 single crystals

Enhanced Dielectric and Piezoelectric Properties of Manganese-Doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb< Sub>2/3)o3-Pbtio3 Single Crystals by Alternating Current Poling

Self-poling and DC poling of Mn doped Pb(Mg 1/3 Nb 2/3 )O 3 -Pb(ZrTi)O 3 single crystals grown by a solid state crystal growth process

A High Performance Piezoelectric Micro Energy Harvester Based on Stainless Steel Substrates

Boosting the Piezoelectric Property of Relaxor Ferroelectric Single Crystal Via Active Manipulation of Defect Dipole Polarization