Abstract:The mine shaft is an important channel linking the underground with the surface, undertaking important functions such as personnel and material transportation and ventilation. Thus the shaft, known as the throat of the mine, is the production hub of the whole mine. Since 1980, damage to coal mine shafts has occurred in many areas of China, which has seriously impacted the safety of mine production. Therefore, real-time monitoring of the shaft wall condition is necessary. However, the traditional monitoring method cannot achieve long-term, continuous and stable monitoring of the shaft wall due to the harsh production environment downhole. Hence, a multi-mode joint sensing system for shaft wall deformation and damage is proposed, which is mainly based on FBG sensing and supplemented by vibrating-string sensing. The principle of FBG sensing is that when the external environment such as temperature, pressure and strain changes, the characteristics of light transmission in the FBG such as wavelength, phase and amplitude will also change accordingly. Using the linear relationship between the strain and the wavelength shift of the FBG, the strain of the measured structure is obtained by calculation. Firstly, this paper introduces the basic situations of the mine and analyzes the causes shaft damage. Then the vertical and circumferential theoretical values at different shaft depths are derived in combination with the corresponding force characteristics. Moreover, a four-layer strain transfer structure model of the shaft consisting of the fiber, the protective layer, the bonding layer and the borehole wall is established, which leads to the derivation of the strain transfer relational expression for the surface-mounted FBG sensing on the shaft wall. The strain-sensing transfer law and the factors influencing the strain-sensing transfer of the surface-mounted FBG on the shaft wall are analyzed. The order of key factors influencing the strain-sensing transfer is obtained by numerical simulation: the radius of the protective layer, the length of the FBG paste, and the elastic modulus of the adhesive layer. The packaging parameters with the best strain-sensing transfer of the surface-mounted FBG on the shaft wall are determined. A total of six horizontal level monitoring stations are arranged in a coal mine auxiliary shaft. Through the comprehensive analysis of the sensing data of the two sensors, the results show that the average shaft wall strain–transfer efficiency measured by the FBG sensor reaches 94.02%. The relative average error with the theoretical derivation of shaft wall transfer efficiency (98.6%) is 4.65%, which verifies the strain transfer effect of the surface-mounted FBG applied to the shaft wall. The shaft wall's deformation monitoring system with FBG sensing as the main and vibrating-string sensing as the supplement is important to realize the early warning of well-wall deformation and further research of the shaft wall rupture mechanism.

Research on operation characteristics of hoisting conveyance under mining deformation action in mine vertical shaft

Monitoring and Analysis of Dynamic Response for Open-Pit Mine with Inside Inclined Shafts under Train Loading

Posture and Dynamics Analysis of Hydraulic Support with Joint Clearance under Impact Load

Modelling and Response Analysis of Multibody Large-Scale Displacement of Boom-Type Roadheader

Simulation test on shaft deformation induced by mining subsidence under similar gravity field in deep soil strata

Mining-induced deformation for a haulage drift of the hanging wall at Jinshandian iron mine in China

Research and Experimental Verification on Coupling Mechanical Characteristics of Surrounding Rock of Hydraulic Support Group in Comprehensive Working Face

Analysis of the surface deformation characteristics and strata movement mechanism in the main shaft area of Chengchao Iron Mine

Research and Application of Multi-Mode Joint Monitoring System for Shaft Wall Deformation

Deformation characteristics and stability control of a gateroad in fully mechanized mining with large mining height

Stability Control of a Goaf-Side Roadway under the Mining Disturbance of an Adjacent Coal Working Face in an Underground Mine

Analysis of the load‐bearing characteristics of hydraulic supports for top‐coal caving under the impact of coal and gangue

A Simulation Experimental Study on the Advance Support Mechanism of a Roadway Used with the Longwall Coal Mining Method

Effect of multi-factor dynamic loading on gob-side entry driving during longwall face extraction: a case study

Longitudinal torsional vibrations of the chain drive system of mine scraper conveyor

Analyzing Support Stability of Deep Shaft Based on Plastic Softening and Dilatancy of Hard Rock Mass

Experimental study on the interrelation of multiple mechanical parameters in overburden rock caving process during coal mining in longwall panel

Adaptability Analysis of Four-Leg Hydraulic Support with Large Mining Height under Impact Dynamic Load

Surrounding Rock Stability Control Technology of Roadway in Large Inclination Seam with Weak Structural Plane in Roof

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

Mechanism and Control of Asymmetric Floor Heave in the Gob-Side Coal Roadway under Mining Pressure in Extra-Thick Coal Seams