Abstract:Purpose. Creating a generalized algorithm to account for factors (coal seam thickness, enclosed rock mechanical properties, the dimension and bearing capacity of artificial support patterns) causing a gateroad state under the effect of longwall face and goaf. Methods. The assessment of the gateroad stability is based on numerical simulation of the rock stress-strain state (SSS). The finite element method is used to find out the changes in the SSS of surrounding rocks at various stages of longwall mining. The elastic-plastic constitutive model and Hoek-Brown failure criterion implemented in codes RS2 and RS3 (Rocscience) are applied to determine rock displacements dependently on the coal seam thickness, enclosed rock strength, width and strength of artificial support (a packwall comprised of hardening mixture “BI-lining”). To specify the mechanical properties of the packwall material a series of experimental tests were conducted. A computational experiment dealing with 81 combinations of affecting factors was carried out to estimate the roof slag and floor heaving in the gateroad behind the longwall face. A group method of data handling (GMDH ) is employed to generalize the relationships between rock displacements and affecting factors. Findings. The roof-to-floor closure in the gateroad has been determined at the intersection with the longwall face and goaf dependently on the coal seam thickness, enclosed rock strength, width of the packwall, and strength of hardening material. It is revealed that the support material gains the strength value of 30 MPa on the 3rd day from its beginning to use which is fully corresponding to the requirements of protective element bearing capacity. The possibility of using untreated mine water to liquefy the mixture is proved, that allows simplifying and optimizing the solute mixing and pumping technology. Originality. This study contributes to improving the understanding of the factors that influence the stability of underground mining operations and highlights the importance of utilizing numerical simulations in optimizing mining designs. The impact of each factor on the resulting variable (decrease in cross-section of gate road by height) based on the combinatorial algorithm of structural identification of the model is estimated as follows: the packwall width is 48%, the thickness of coal seam is 25%, the strength of enclosing rocks is 23%, and the strength of the packwall material is 4%. Practical implications. The findings provide stakeholders with a technique to determine reasonable parameters for support and protective systems, and the predictive model developed can be used to mitigate potential instability issues in longwall mining excavations. The results have implications under similar geological settings and can be valuable for mine design and optimization in other regions.

Effect of multi-factor dynamic loading on gob-side entry driving during longwall face extraction: a case study

Failure characteristics and stability control technology of dynamic pressure roadway affected by the mining activity: A case study

Head-On Dynamic Manifestations in the Roadway Driving with Small Coal Pillar under the Influence of Roof Drainage: A Case Study from Uxin Banner

Instability Mechanism and Surrounding Rock Control Technology of Roadway Subjected to Mining Dynamic Loading with Short Distance: A Case Study of the Gubei Coal Mine in China

Research on the Control Technology and Key Parameters of External Anchor-Internal Unloading of Surrounding Rock During Gob-Side Entry Driving Under Severe Mining of 1000-m-Deep Mine

Deformation mechanism and control technology of gob-side roadway with continuous mining and continuous backfilling: a case study

Multifactorial analysis of a gateroad stability at goaf interface during longwall coal mining – A case study

Deformation mechanism and control technology of gob-side entry retaining with roadside backfilling: a numerical analysis and field investigation

Control Techniques for Gob-Side Entry Driving in an Extra-Thick Coal Seam with the Influence of Upper Residual Coal Pillar: A Case Study

Dynamic Response Mechanism of Impact Instability Induced by Dynamic Load Disturbance to Surrounding Rock in High Static Loading Roadway

New Technology of Pressure Relief Control in Soft Coal Roadways with Deep, Violent Mining and Large Deformation: A Key Study

Stability Control of a Goaf-Side Roadway under the Mining Disturbance of an Adjacent Coal Working Face in an Underground Mine

Analysis of Surrounding Rock Control Technology and Its Application on a Dynamic Pressure Roadway in a Thick Coal Seam

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway

An Innovative Mechanism of Directional Rock Cracking Mechanics and Mine Pressure Control Method for Energy-Gathering Blasting

Dynamic Loading Mechanism and Stability Control of Gob-Side Entry Retaining with Thick and Hard Roof: Insights from Numerical Simulation and Field Test

Zoning Control Technology of Gob-Side Roadway Driving with Small Coal Pillar Facing Mining in a Special Isolated Island Working Face: A Case Study

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Study on stress distribution law of surrounding rock of roadway under the goaf and mechanism of pressure relief and impact reduction

Stability Control of Deep Coal Roadway under the Pressure Relief Effect of Adjacent Roadway with Large Deformation: A Case Study

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine