Abstract:O and N substitution produces ultrastable POS33– and Li3N unique functional units, wherein POS33‐ intrinsically enhance the structural stability of Li2.96P0.98S3.92O0.06–Li3N glass–ceramic and suppresses the generation of toxic H2S in the ambient environment. Furthermore, O and N leads to the Pre‐solid‐electrolyte interphase (SEI) enriched Li2O, and Li3N species realize stable and reversible Li‐stripping/plating for Li//Li cells beneficial for all‐solid‐state lithium–metal batteries.The marriage of solid‐state sulfide electrolytes (SSSEs) with Li‐anode and oxide‐based cathodes can multiply the energy density of all‐solid‐state Lithium–metal batteries (ASSLMBs). However, hydrolysis in the air, reduction at the Li/SSSE interface, and growth of Li‐dendrites inside SSSEs collectively block the route of sulfide‐based ASSLMBs. Herein, a novel Li2.96P0.98S3.92O0.06‐Li3N glass–ceramic electrolyte (GCE) is developed, wherein O and N substitution produce POS33– and Li3N unique functional units enable superior σLi+ 1.58 mS cm–1 at RT. Notably, POS33– units in Li2.96P0.98S3.92O0.06‐Li3N excellently prevent the structural degradation against moisture @45–50%. The critical current density of Li2.96P0.98S3.92O0.06–Li3N reaches 1 mA cm–2/1 mAh cm–2 @ RT. Moreover, Li//Li cells realize unprecedented Li‐plating/stripping >1000 h at 0.3 mA cm–2/0.3 mAh cm–2 and 0.5 mA cm–2/0.5 mAh cm–2 at RT. ToF‐SIMS and depth‐X‐ray photoelectron spectroscopy (XPS) confirm the formation of Pre‐solid‐electrolyte interphase (SEI) enriched with thermodynamically stable Li2O and Li3N species at Li/Li2.96P0.98S3.92O0.06–Li3N interface, suppressing the interfacial reactions and growth of Li‐dendrites inside Li2.96P0.98S3.92O0.06–Li3N. Furthermore, LiNbO3@NCA/Li2.96P0.98S3.92O0.06–Li3N/Li cells deliver a remarkable initial discharge capacity of 177.3, 177.6, and 177.8 mAh g–1 with 7.50, 16.50, and 21.50 mg cm–2 of NCA loading. Thus, the novel Li2.96P0.98S3.92O0.06–Li3N GCE addresses all key challenging issues and has tremendous potential to be used in sulfide‐based high‐energy ASSLMBs.

Lead-Free Double Perovskite Cs 2 NaErCl 6 : Li + as High-Stability Anodes for Li-Ion Batteries

Excellent Stability of a Lithium‐Ion‐Conducting Solid Electrolyte Upon Reversible Li+/H+ Exchange in Aqueous Solutions

Lead-Free Solid-State Organic–Inorganic Halide Perovskite Electrolyte for Lithium-Ion Conduction

Double Perovskite La2MnNiO6 as a High‐Performance Anode for Lithium‐Ion Batteries

Progress of Lead‐Free Halide Double Perovskites

Perovskite‐Type SrVO 3 as High‐Performance Anode Materials for Lithium‐Ion Batteries

Perovskite CsPbI 3 Nanowire-Reinforced PEO Electrolytes Toward High-Rate All-Solid-State Lithium–Metal Battery

Cation-deficient Perovskite Li0.35Nd0.55TiO3 As a High-Performance Anode for Lithium-Ion Batteries

A Dual-Halogen Electrolyte for Protective-Layer-free All-Solid-state Lithium Batteries

Realization of High Capacity and Cycling Stability in Pb-Free A2 CuBr4 (A=CH3 NH3 /Cs, 2 D/3 D) Perovskite-Based Li-Ion Battery Anodes

Progress of All-inorganic Cesium Lead-free Perovskite Solar Cells

Lead-Free Cesium-Containing Halide Perovskite and Its Application in Solar Cells

A Na-rich Fluorinated Sulfate Anti-Perovskite with Dual Doping As Solid Electrolyte for Na Metal Solid State Batteries

An Emerging Lead‐Free Double‐Perovskite Cs 2 AgFeCl 6 :In Single Crystal

Unveiling BaTiO3-SrTiO3 as Anodes for Highly Efficient and Stable Lithium-Ion Batteries

Rapidly In Situ Cross-Linked Poly(butylene oxide) Electrolyte Interface Enabling Halide-Based All-Solid-State Lithium Metal Batteries

One Stone, Three Birds: Cu2+-Substituted Chloride Electrolyte for High-Performance All-Solid-State Lithium Batteries

Highly Dense Perovskite Electrolyte with a High Li+ Conductivity for Li–ion Batteries

Green in Situ Growth Solid Electrolyte Interphase Layer with High Rebound Resilience for Long-Life Lithium Metal Anodes.

Antiperovskite Electrolytes for Solid-State Batteries

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries