Abstract:The development of a high-voltage olivine cathode is of great interest to increase the energy density of Li-ion batteries. Focusing on the multicomponent LiFe 0·4 Mn 0·3 Co 0·3 PO 4 (LFMCP) olivine material, in which the involvement of Co is necessary to extend the operating voltage range of the olivine materials up to 5.0 V despite having many critical issues, our research shows that the construction of Li-ion transfer channels on the particle surface is a key factor for the practical realization of the high-voltage cathode. A systematic electrochemical investigation reveals that the weakening and disappearance of the Mn activity due to the redox shift and overlap during cycling are responsible for the poor capacity delivery and capacity retention of the multicomponent LFMCP material. Surface coating of the LFMCP material with either carbon (LFMCP@C) or with a combination of carbon and LATP (LFMCP@C_LATP) helps to identify and stabilize the redox regions of the Fe, Mn, and Co components. The presence of LATP as a Li-ion conductor and an electrochemically active component on the LFMCP particle surface can induce the formation of the Li-ion concentration gradient between the core and the shell to facilitate the Li-ion diffusion during cycling. As a result, the LFMCP@C_LATP has faster Li-ion diffusion in all redox regions, more stable operating plateaus, and can therefore provide better capacity and retention than the conventional LFMCP@C. The LFMCP@C_LATP can provide a discharge capacity of 139.2 mA h g −1 with 80.5 % retention after 50 cycles, while the LFMCP@C provides a discharge capacity of 135.1 mA h g −1 with 68.4 % retention under the same cycling conditions, using a common electrolyte without the addition of any high-voltage additive.

Design of interfacial Li-ion transfer channels for practical improvement of a multicomponent high-voltage olivine cathode

Ultrahigh Rate Capability of Manganese Based Olivine Cathodes Enabled by Interfacial Electron Transport Enhancement

Engineering Manganese-Rich Phospho-Olivine Cathode Materials with Exposed Crystal {0 1 0} Facets for Practical Li-ion Batteries

High power performance of multicomponent olivine cathode material for lithium-ion batteries

Engineering Manganese-rich Phospho-olivine Cathode Materials with Exposed Crystal (010) Facets for Practical Li-ion Batteries

Surfactant Induced Crystal Regulation and Dual Layer Carbon Coating Formation for Enhanced Performance of High Voltage Olivine-Type Lithium Cobalt Phosphate Cathode Materials

Dual Modification of Olivine LiFe0.5Mn0.5PO4 Cathodes with Accelerated Kinetics for High-Rate Lithium-Ion Batteries

Novel carbon coating source for better LiMn0.6Fe0.4PO4/C materials

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Mechanical alloy coating of LATP decorated porous carbon on LiFe1/3Mn1/3Co1/3PO4/C composite cathode for high-voltage Li-ion battery

Fast Charge-Transport Interface on Primary Particles Boosts High-Rate Performance of Li-Rich Mn-Based Cathode Materials.

Improving electrochemical performance of LiMn<sub>0.5</sub>Fe<sub>0.5</sub>PO<sub>4</sub> cathode by hybrid coating of Li<sub>3</sub>VO<sub>4</sub> and carbon

Na/Co dual-doped olivine LiMn0.6Fe0.4PO4 cathode with superior reaction kinetics for Li-ion batteries

Stabilizing the Structure of LiMn0.5Fe0.5PO4via the Formation of Concentration-Gradient Hollow Spheres with Fe-rich Surfaces.

Effect of Heteroatom Doping on Electrochemical Properties of Olivine LiFePO4 Cathodes for High-Performance Lithium-Ion Batteries

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Synthesis and Characterization of a LiFe 0.6 Mn 0.4 PO 4 Olivine Cathode for Application in a New Lithium Polymer Battery

Synthesis and Characterization of a LiFe0.6Mn0.4PO4 Olivine Cathode for Application in a New Lithium Polymer Battery

Blending Layered Cathode with Olivine: An Economic Strategy for Enhancing the Structural and Thermal Stability of 4.65 V LiCoO2

An interfacial framework for breaking through the Li-ion transport barrier of Li-rich layered cathode materials