Abstract:In this study, a six-degree-of-freedom (6-DOF) motion platform is utilized to simulate the transverse rolling motion of aquaculture tanks aboard deep-sea aquaculture vessels. It examines the effects of different inlet configurations (single and four-pipe inlet), rolling motions (amplitude Θ and period T ), and inlet pipe jet angles α (the acute angle between the jet direction of the inlet pipe and the inclined wall to which it is connected) on the self-cleaning capabilities and flow field characteristics of the aquaculture tank. The findings indicate that the waste collection time in the tank is affected by the combined influences of rolling amplitude and period. In the single-pipe inlet configuration, waste collection time increases with the rolling period and initially increases, then decreases with the rolling amplitude. In the four-pipe inlet configuration, waste collection time increases with the rolling period and decreases with the rolling amplitude. Optimal waste collection performance is achieved at α = 45° in both configurations. Regarding flow field characteristics, variations in rolling period and amplitude significantly alter the flow field within the aquaculture tank. In both configurations, as the period decreases and the amplitude increases, the high-velocity regions and the central vortex area within the tank expand, and the average flow velocity of the water also rises. This corresponds to a reduction in waste collection time and an increase in the waste collection rate. In both configurations, the Flow field is most uniform at α = 45°, which corresponds to the highest waste collection capabilities among all jet angles. The results indicate that while decreasing the rolling period and increasing the amplitude can enhance the self-cleaning capabilities, they also lead to excessively rapid water flow velocities. In practical applications, it is important to select appropriate farming areas based on fish suitability and to choose the correct inlet jet angles for different numbers of inlets. The findings can provide theoretical support and a scientific basis for optimizing the flow characteristics and self-cleaning performance of aquaculture vessels under rolling motion and contribute positively to the advancement of deep-sea aquaculture technology.

Residence time distribution of an offshore floating photobioreactor under hydrodynamic sloshing effect

Residence time distribution in a new horizontal self-cleaning reactor with viscous media

Characterization of Fine-Scale Turbulence Generated in a Laboratory Orbital Shaker and Its Influence on Skeletonema Costatum

Study of Wave-Induced Mass Transport and Internal Mixing Based on a Two-Liquid VOF Model

Generating Cycle Flow Between Dark and Light Zones with Double Paddlewheels to Improve Microalgal Growth in a Flat Plate Photo-Bioreactor.

Hydrodynamic performance of floating photobioreactors driven by wave energy

Enhancing Microalgal Biomass Productivity with an Optimized Flow Field Generated by Double Paddlewheels in a Flat Plate Photoreactor with CO2 Aeration Based on Numerical Simulation

Numerical Investigation of Flow Characteristics and Irradiance History in a Novel Photobioreactor

Sloshing-induced evolution of self-cleaning performance and flow characteristics within a tank installed on an offshore aquaculture vessel

Developing A Three-Dimensional Tangential Swirl Plate Photobioreactor To Enhance Mass Transfer And Flashlight Effect For Microalgal Co2 Fixation

Numerical Simulation on Optimizing Flow Field and Flashing-Light Effect in Jet-Aerated Tangential Swirling-Flow Plate Photobioreactor to Improve Microalgal Growth

Enhanced Solution Velocity Between Dark and Light Areas with Horizontal Tubes and Triangular Prism Baffles to Improve Microalgal Growth in a Flat-Panel Photo-Bioreactor.

Dispersion of swimming algae in laminar and turbulent channel flows: consequences for photobioreactors

Surface wave dynamics in orbital shaken cylindrical containers

Flow field optimization and flashing light effect of flat plate photobioreactor for microalgae growth

A Novel Jet-Aerated Tangential Swirling-Flow Plate Photobioreactor Generates Microbubbles That Enhance Mass Transfer and Improve Microalgal Growth.

Optimizing aeration efficiency and forecasting dissolved oxygen in brackish water aquaculture: Insights from paddle wheel aerator

Optimal optical conditions for Microalgal production in photobioreactors

Improving Microalgal Growth with Reduced Diameters of Aeration Bubbles and Enhanced Mass Transfer of Solution in an Oscillating Flow Field

Improving Microalgal Growth by Strengthening the Flashing Light Effect Simulated with Computational Fluid Dynamics in a Panel Bioreactor with Horizontal Baffles

Dispersion of a gyrotactic micro-organism suspension in a vertical pipe: the buoyancy–flow coupling effect