Abstract:Pitting corrosion of steel bars can greatly impair mechanical properties of steel bars, so detecting pitting corrosion timely and accurately is crucial for assessing the health of structures. However, most current corrosion detection methods have some difficulties measuring pitting corrosion level of steel bars effectively. Considering that corrosion pits can cause strain redistribution of steel bar in the tensile state, this study proposes a method to quantitatively determine the pitting corrosion level through monitoring the steel strain distribution. Distributed optical fiber sensors (DOFS) based on Rayleigh scattering and capable of achieving the spatial resolution in millimeter scale were adopted to monitor the strain distributions of notched HRB400E steel bars subjected to tensile stress, and finite element (FE) method was employed to analyze the strain distributions of steel bars with different pit geometries. Experimental results showed that the bare fiber sensors (PI-FS) measured steel strain more accurately than jacketed fiber sensors. From strain distributions monitored by PI-FS, the pit location and pit length can be directly determined. Further, FE results revealed that the strain distribution along the fiber sensor position was significantly affected by the fiber sensor position relative to the pit mouth. Finally, the procedures to determine the pitting corrosion level from DOFS data and FE results were presented by mathematically comparing the similarity of strain curves given by the fiber sensor on a pitting-corroded bar and FE analyses of steel bars with different corrosion levels. In the end, the issues related to the practical applicability of the proposed method were discussed and limitations of this study were addressed. Although with limitations, this study provided a novel and promising way to quantitatively monitor the pitting corrosion level based on the strain distribution of steel bars.

Experimental Investigation for Monitoring Corrosion Using Plastic Optical Fiber Sensors

Corrosion Monitoring by Plastic Optic Fiber Sensor Using Bi-Directional Light Transmission

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Corrosion monitoring and assessment of steel under impact loads using discrete and distributed fiber optic sensors

Fiber Optic Corrosion Sensor Fabricated By Electrochemical Method

FIBER OPTICS SENSING TECHNIQUE FOR MONITORING CORROSION OF STEEL IN REINFORCED CONCRETE

Application of Plastic Optical Fiber Fatigue Sensor in Real-Time Monitoring of Fatigue Cracks in Steel Structures

§ Quantitative Monitoring of Localized Pitting Corrosion in Steel Bars Through a Combined Use of Distributed Optical Fiber Sensors and Finite Element Analyses

A review of fiber-optic corrosion sensor in civil engineering

Monitoring Under-Coating Corrosion of Painted Structural Steel with No-Core Fiber Optic Sensors

Simultaneous Measurement of Early-Stage Corrosion and Strain Levels in Steel Rebars Based on LPG-FBG Optical Fiber Sensor

Exploratory Research on Ultra-Long Polymer Optical Fiber-Based Corrosion Sensing for Buried Metal Pipelines

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Monitoring The Corrosion Of Steel In Reinforced Concrete Using Optical Waveguide Methods

Effect of Stress Level and Localized Corrosion on the Strain Transfer Between Corroded Steel Rebar and Distributed Fiber Optic Sensor

Characterization of Single-Mode Multimode Single-Mode Fiber Optic Sensors for Steel Rebar Corrosion Monitoring in NaCl and Simulated Concrete Pore Solutions

Early Corrosion Monitoring of Reinforcing Steel Bars by Using Long-Gauge Carbon Fiber Sensors

Research On Corrosion Detection For Steel Reinforced Concrete Structures Using The Fiber Optical White Light Interferometer Sensing Technique

Fiber optic sensing techniques for monitoring corrosion of steel in concrete