Abstract:Grouting is a highly effective engineering intervention utilized to address water inrush disasters and reinforce weak surrounding rock formations, with the grouting material playing a crucial role in determining the outcomes of grouting operations. To simultaneously meet the requirements of water plugging and reinforcement, a new polyacrylate latex modified cement grout was prepared, consisting of superfine cement, polyacrylate latex, a defoaming agent, and a coagulation accelerator. This study reports on a series of tests conducted to examine the workability, mechanical properties, and microstructures of polyacrylate latex modified cement grout with varying ratios. The experimental results indicate that the addition of polyacrylate latex significantly reduces the bleeding ratio of the grout, as well as improves its groutability and enhances its resistance to dynamic water scouring, particularly under high-flow conditions. The viscosity of the composite grout increases by adding polyacrylate, leading to a decrease in its fluidity. As the proportion of polyacrylate latex increases, the early and final strength of the grout stone body increases while the porosity decreases. The hydration degree of the grout shows a growing trend with the addition of polyacrylate latex based on the observations by low-field nuclear magnetic resonance tests. The modified grout stone body is dense, primarily due to the chemical reaction between calcium ions produced by cement hydration and carboxyl groups produced by the hydrolysis of ester groups on the polyacrylate latex, leading to cross-linking between the inorganic and organic phases and the formation of a complex network structure. Excellent working performance particularly in terms of anti-scour and load-bearing capacity makes polyacrylate modified cement grouting materials highly suitable for use in the simultaneous treatment of water inrush and reinforcement.

Influence of Materials of Moulds and Geometry of Specimens on Mechanical Properties of Grouts Based on Ultrafine Hydraulic Binder

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Workability and mechanical properties of ultrafine cement based grout for structural rehabilitation: A parametric study on the partial replacement with SCMs

An experimental study of the effect of cement and chemical grouting on the improvement of the mechanical and hydraulic properties of alluvial formations

Identification of Microplane Coefficients to Reproduce the Behaviour of Ultrafine Blast-Furnace Slag Binder Grout Samples

Study on the Strength and Micro Characteristics of Grouted Specimens with Different Superfine Cement Contents

The Effect of Incorporating Ultra-Fine Spherical Particles on Rheology and Engineering Properties of Commercial Ultra-High-Performance Grout

Sand and silt treatment with novel binders

Experimental Study on the Mechanical Performance of Grouted Specimen with Composite Ultrafine Cement Grouts

Effect of multiphasic structure of binder particles on the mechanical properties of a gypsum-based material

Study on properties of inorganic grouting material modified by ultrafine slag powder

Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis

Gypsum hemihydrate–cement blends to improve renderings durability

Effect of Porosity/Binder Index on Strength, Stiffness and Microstructure of Cemented Clay: The Impact of Sustainable Development Geomaterials

Study on the effect of mineral admixtures on working and mechanical properties of the grouting material

Investigation on basic properties and microscopic mechanisms of polyacrylate latex modified cement grouting material for water blocking and reinforcement

Exploring the mechanical response of low-carbon soil improvement mixtures

Experimental study on physical properties of superfine cement grouting material

Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials