Abstract:In order to implement numerical simulation of the thermal-mechanical behaviors in the nuclear fuel rods, a three-dimensional finite element model is established. The thermal-mechanical behaviors at the initial stage of burnup in both the pellet and the cladding are obtained. Comparison of the obtained numerical results with those from experiments validates the developed finite element model. The effects of the constraint conditions, several operation and structural parameters on the thermal-mechanical performances of the fuel rod are investigated. The research results indicate that: (1) with increasing the heat generation rates from 0.15 to 0.6 W/mm(3), the maximum temperature within the pellet increases by 99.3% and the maximum radial displacement at the outer surface of the pellet increases by 94.3%. And the maximum Mises stresses in the cladding all increase; while the maximum values of the first principal stresses within the pellet decrease as a whole; (2) with increasing the heat transfer coefficients between the cladding and the coolant, the internal temperatures reduce and the temperature gradient remains similar; when the heat transfer coefficient is lower than a critical value, the temperature change is sensitive to the heat transfer coefficient. The maximum temperature increases only 7.13% when h changes from 0.5 W/mm(2) K to 0.01 W/mm(2) K, while increases up to 54.7% when h decreases from 0.01 W/mm(2) K to 0.005 W/mm(2) K; (3) the initial gap sizes between the pellet and the cladding significantly affect the thermal-mechanical behaviors in the fuel rod; when the gap size varies from 0.03 mm to 0.1 mm, the highest temperature in the pellet increases by 19.7%, and the maximum first principal stress at the outer pellet surface decreases by 17.4%; it is critical to optimize the gap size in order to reduce the pellet-cladding mechanical interaction and avoid their contact at early stage. This study lays a foundation for the further research on the irradiation-induced mechanical behaviors in the fuel rods. (C) 2011 Elsevier Ltd. All rights reserved.

Solution To A Coupled Problem Of Thermomechanical Contact Of Fuel Elements

Finite Element Modeling of Thermal-Mechanical Behaviors of Dispersion Fuel Elements

Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Finite Element Simulation for Effective Thermal Conductivity Coefficient of Dispersion Fuel Element

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

Multidimensional modeling of fuel-cladding friction in an LWR fuel rod

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods

An Innovative Multi-Layer Shell Model for In-Pile Thermo-Mechanical Behavior Analysis of Plate-Type Fuel Assemblies

Multi-physics Field Coupling Optimization Study for U3Si2-Al 3 Si 2-Al Arc-Type Fuel Plate Performance Analysis

Thermo-mechanical Coupling Behavior Analysis for a U–10Mo/Al Monolithic Fuel Assembly

A numerical method for simulating the non-homogeneous irradiation effects in full-sized dispersion nuclear fuel plates

3-Dimensional Multiphysics Modeling of Behaviors of Pressurized Water Reactor Fuel Rods With Missing Pellet Surface

A Method for 3d Simulation of Internal Gas Effects on Thermal-Mechanical Behaviors in Nuclear Fuel Elements

Numerical Simulation of Temperature Fields in Planar Fuel Assembly

Thermal-fluid-structure Coupling Analysis for Plate-Type Fuel Assembly under Irradiation. Part-I Numerical Methodology

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements

Multi-Physics Field Coupling Optimization Study for U3si2-Al Arc-Type Fuel Plate Performance Analysis

Finite Element Simulation for Equivalent Elastic Properties of Dispersion Fuel Elements