Abstract:In order to implement numerical simulation of the thermal-mechanical behaviors in the nuclear fuel rods, a three-dimensional finite element model is established. The thermal-mechanical behaviors at the initial stage of burnup in both the pellet and the cladding are obtained. Comparison of the obtained numerical results with those from experiments validates the developed finite element model. The effects of the constraint conditions, several operation and structural parameters on the thermal-mechanical performances of the fuel rod are investigated. The research results indicate that: (1) with increasing the heat generation rates from 0.15 to 0.6 W/mm(3), the maximum temperature within the pellet increases by 99.3% and the maximum radial displacement at the outer surface of the pellet increases by 94.3%. And the maximum Mises stresses in the cladding all increase; while the maximum values of the first principal stresses within the pellet decrease as a whole; (2) with increasing the heat transfer coefficients between the cladding and the coolant, the internal temperatures reduce and the temperature gradient remains similar; when the heat transfer coefficient is lower than a critical value, the temperature change is sensitive to the heat transfer coefficient. The maximum temperature increases only 7.13% when h changes from 0.5 W/mm(2) K to 0.01 W/mm(2) K, while increases up to 54.7% when h decreases from 0.01 W/mm(2) K to 0.005 W/mm(2) K; (3) the initial gap sizes between the pellet and the cladding significantly affect the thermal-mechanical behaviors in the fuel rod; when the gap size varies from 0.03 mm to 0.1 mm, the highest temperature in the pellet increases by 19.7%, and the maximum first principal stress at the outer pellet surface decreases by 17.4%; it is critical to optimize the gap size in order to reduce the pellet-cladding mechanical interaction and avoid their contact at early stage. This study lays a foundation for the further research on the irradiation-induced mechanical behaviors in the fuel rods. (C) 2011 Elsevier Ltd. All rights reserved.

A Method for 3d Simulation of Internal Gas Effects on Thermal-Mechanical Behaviors in Nuclear Fuel Elements

A new method to simulate the micro-thermo-mechanical behaviors evolution in dispersion nuclear fuel elements

Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements

SIMULATION OF FISSION GAS BUBBLE DISTRIBUTION AND CALCULATION OF EFFECTIVE THERMAL CONDUCTIVITY IN U-Zr METALLIC FUEL BASED ON PHASE-FIELD METHOD

Simulation of the In-Pile Behaviors Evolution in Nuclear Fuel Rods with the Irradiation Damage Effects

An analytical solution for simulation of the fission gas behaviors with time-dependent piece-wise boundary resolution

Numerical simulation of the irradiation-mechanical behaviors of dispersion nuclear fuel elements

Simulation of the Irradiation-Induced Micro-Thermo-Mechanical Behaviors Evolution in Ads Nuclear Fuel Pellets

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods

A new method for solving the fission gas diffusion equations with time-varying diffusion coefficient and source term considering recrystallization of fuel grains

Mechanical Behaviors of the Dispersion Nuclear Fuel Plates Induced by Fuel Particle Swelling and Thermal Effect I: Effects of Variations of the Fuel Particle Volume Fractions

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

A simulation research on thermal-pressure coupling loading of a 1:3.2 containment model

Real-Time Simulation of Neutron Space-Time Kinetics for High-Temperature Gas-Cooled Reactor

An Innovative Multi-Layer Shell Model for In-Pile Thermo-Mechanical Behavior Analysis of Plate-Type Fuel Assemblies

Models for Effective Elastic Constants of Irradiated U-10Mo Fuels with Distributed Fission Gas Bubbles

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

A numerical method for simulating the non-homogeneous irradiation effects in full-sized dispersion nuclear fuel plates

Effects of Irradiation Growth on the Thermo-Mechanical Behaviors Evolution in Inert Matrix Fuel Elements

Modeling of irradiation-induced thermo-mechanical coupling behavior in metal matrix microencapsulated fuel

A between-wall heat transfer simulation approach based on the lattice Boltzmann method and its application in tube heat transfer analysis