Abstract:The pulp and paper industry generates vast amounts of wastewater, and its character heavily depends on various factors (raw material, the undertaken process, the final product, etc.). The wastewater from this sector, which originates from several sources in each mill and are mostly combined, is polluting and hazardous. This paper presents a state-of-the-art review of the physical, chemical, biological, and advanced hybrid treatment techniques, concerning their effectiveness in removing specific pollutants, namely, chemical oxygen demand, lignin, color, and adsorbable organo-halogens. Throughout the manuscript, at the end of each section, a conclusive comparison has been presented and the proper method is introduced. Furthermore, numeric data regarding the effectiveness of each technique toward each pollutant are gathered from the literature and are available in the Supporting Information of the paper. Biological treatment processes using anaerobic–aerobic treatment mostly cure organic biodegradable contaminants (75–90% COD removal). Moreover, biological treatment using a consortium of microorganisms can potentially increase color removal efficiency (from 65 to 97%). Hybrid treatment is also among the candidates for color removal. To treat complex matters (lignin and AOX), physical and chemical treatments have shown promising performance, but they are generally expensive and impractical to treat huge amounts of wastewater. For the treatment of high molecular weight contaminants (lignin) advanced oxidation processes (AOPs), including ozonation and Fenton-based treatment, have shown great performance (90–99%); however, they are limited due to their maintenance and operation costs. To overcome these challenges, source separation of the wastewater streams in the pulp and paper industry is recommended. AOPs or membrane technologies or hybrid processes are suggested for the bleaching effluent (80% AOX removal), which is relatively low in amount, and a combination of conventional treatment processes would be preferred to treat wastewater streams that are more biodegradable. The biological performance can also be enhanced using granular activated carbon on the sequence. Finally, for treating black liquor, adsorption processes have proven to be the prime candidate.

Electrochemical Degradation of Pulp and Paper Mill Wastewater. Part 1. COD and Color Removal

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

Chemical oxygen demand and tannin/lignin removal from paper mill wastewater by electrocoagulation combined with peroxide and hypochlorite treatments

COD removal, decolorization, and energy consumption of electrocoagulation as a wastewater treatment process

Study on treatment of paper mill wastewater by electrocoagulation and its sludge analysis

Evaluation and optimization of electrocoagulation for treating Kraft paper mill wastewater

Decolorization of industrial wastewater using electrochemical peroxidation process

Color Removal of Pulp and Paper Mill Wastewater Using Residual Eucalyptus Wood

Effect of solution pH on the performance of three electrolytic advanced oxidation processes for the treatment of textile wastewater and sludge characteristics

2D and 3D electrochemical degradation (ECD) of raw cotton industry wastewater (CIWW) using stainless steel and aluminium electrodes

Colour and organic removal of biologically treated coffee curing wastewater by electrochemical oxidation method

Sono-peroxi-coagulation (SPC) as an effective treatment for pulp and paper wastewater: Focus on pH effect, biodegradability, and toxicity

Advanced Treatment of Paper Mill Wastewater Using Electro-Fenton Process with Novel Catalytic Particle Electrodes

A Comprehensive Review on Pulp and Paper Industries Wastewater Treatment Advances

Study on Treatment of Dyeing Wastewater by DC Electrocoagulation Method

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Ozone assisted alternating current-electrocoagulation technique for color and COD removal with determination of electrical energy from industrial wastewater

Simultaneous removal of chemical oxygen demand, turbidity and hardness from biologically treated citric acid wastewater by electrochemical oxidation for reuse

Pollutants removals and energy consumption in electrochemical cell for pulping processes wastewater treatment: Artificial neural network, response surface methodology and kinetic studies

Treating dyeing wastewater by combination of DC electrocoagulation and biochemical method