Abstract:<p>Remanufacturing technique has been widely used for repairing the damaged regions of aero-engine blades. As the irregularity of weld-seam shape and uneven residual height pose great challenges for the subsequent precision grinding and polishing, it is necessary to use the high efficiency and precision measurement method to obtain a true and accurate weld-seam model, especially in the boundary areas. Therefore, a measurement approach for weld-seam identification and model reconstruction of the remanufacturing blade based on self-developed binocular vision system is presented in this work. The calculation of three-dimensional reconstruction and the complexity of subsequent point cloud processing were reduced by coarse positioning firstly, and then the weld-seam was located precisely by point cloud segmentation based on the region growth algorithm and point cloud normal filtering method. On this basis, a true weld-seam model with precise boundary was obtained. The average error of the boundary extracted by proposed method is about 0.263 mm lower than that of the traditional method. In addition, the B-spline surface was fitted according to the point cloud without weld-seam feature, and a theoretical machining model was obtained by cutting of B-spline surface along the weld-seam boundary. Furthermore, the results of verification experiment indicated that the smoothness error of machined blade surface was less than 0.025 mm and the machining error was less than 0.07 mm. This method has obvious advantages in calculation efficiency and reconstruction accuracy of theoretical machining model while compared with traditional measurement methods for the remanufacturing blade, which is beneficial to improve the machining quality and efficiency of the remanufacturing parts.</p>

An optimal reference iteration-based surface reconstruction framework for robotic grinding of additively repaired blade with local deformation

Worn area modeling for automating the repair of turbine blades

Surface Reconstruction for Deformed Mesh Based on Original Surface Information

Research on robot regrinding trajectory planning and surface characteristics of damaged blades

An adaptive grinding method for precision-cast blades with geometric deviation

Accurate Model Construction of Deformed Aero-Engine Blades for Remanufacturing

BROKEN AREA MODELING FOR REPAIR AUTOMATION

Enhancing Robotic-Based Propeller Blade Sharpening Efficiency with a Laser-Vision Sensor and a Force Compliance Mechanism

Collaborative improvement of profile accuracy and aerodynamic performance in robotic grinding of transonic compressor blade leading edge

A vision-based calibration method for aero-engine blade-robotic grinding system

Tool path modification based on deformation mapping relationship for the adaptive machining of aero-engine blade

Process optimization of robotic grinding to guarantee material removal accuracy and surface quality simultaneously

Research on hybrid remanufacturing process chain of laser cladding, CNC machining and ultrasonic rolling for aero-engine blades

Process planning and contour-based error compensation for precision grinding of miniature scalpels

A method for fast reconstruction of closed section workpiece surface using point clouds

Robotic blade grinding based on reverse engineering

An accurate surface error optimization for five-axis machining of freeform surfaces

Technology-Based Recontouring of Blade Integrated Disks After Weld Repair

A Robotic Polishing Trajectory Planning Method Combining Reverse Engineering and Finite Element Mesh Technology for Aero-Engine Turbine Blade TBCs

Weld-seam identification and model reconstruction of remanufacturing blade based on three-dimensional vision

A High-Precision T-spline Blade Modeling Method with 2D and 3D Knot Adaptive Refinement