Abstract:The battery charging control within wind turbine applications is the most important challenge in standalone exploitation mode because of the random nature of wind energy and irregular use of electricity. Within this problematic, this paper deals with monitoring and control of a permanent magnet synchronous generator voltage for battery charging. In the proposed topology, the output direct drive PMSG is linked to the battery through a vector-controlled pulse modulated (PWM) rectifier. Most wind energy conversion systems are based on precise knowledge of the wind speed, which makes the adjustment of the charge voltage relatively complicated, and degrades the powers captured with erroneous measurements of this wind speed. In this context, all the efforts of this work are meant to simplify and improve the dynamic performance of the system. The technique used in this work is devoid of wind measurement. By neglecting different losses, the approach adopted leads us to the reference electromagnetic torque, assuming that the wind speed and consequently the rotational speed of the turbine vary slowly in steady state. Using the load current and voltage measures, the proposed controllers calculate permanently the power reference that corresponds to the fixed battery voltage. A vector control approach is adopted to achieve decoupled power control on the supply side power converter by generating the direct and quadrature control voltages. These voltages are necessary to generate the corresponding duty cycles of the PWM active switching devices. Hence, the PWM rectifier maintains the battery voltage at a fixed value by balancing both the rectifier output current and the load input current. To activate the vector control, two dynamic controllers are designed, simulated, and compared. The first controller is based on simple PI regulators. Meanwhile, the second one, which is a sliding mode technique, is applied to control the battery voltage. In order to assess the effectiveness of the used techniques, simulation models have been subjected to critical conditions of changing in speed and load. Simulation results revealed a poor accuracy of the first technique during transients and its close correlation under load disturbance. Whereas the sliding mode controller has high precision and strong robustness in steady state and during transient phases. The system simulation is performed using MATLAB/SIMULINK.

Control system with electronic braking capabilities for micro wind turbines

The Digital Soft Braking for Wind Turbine

A Cost-Effective Regenerative Braking System for Electric Vehicles Driven by Induction Machine

Simulation Experiment on Wind Turbine Soft Braking

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

A Novel Control Strategy of an Active Crowbar for DFIG-based Wind Turbine During Grid Faults

Development of a three-bladed horizontal axis wind turbine with active control by using a programmable logic controller

Enhanced Performance in PMSG-Based Wind Turbine Systems: Experimental Validation of Adaptive Backstepping Control Design

Robust Speed Tracking Control for a Micro Turbine as a Distributed Energy Resource via Feedback Domination and Disturbance Observer

Study on the Control Method for Wind-electric Pumping System in High Wind Speed Conditions

MR fluid-Based threshold-feedback overload-protection system for miniature turbine generator

Regenerative braking system using pulse width modulation technique on brushed DC motor

Direct Power Control Based on Modified Sliding Mode Controller for a Variable-Speed Multi-Rotor Wind Turbine System Using PWM Strategy

Development of Active Wind Vane for Low-Power Wind Turbines

Control System for the Performance Analysis of Turbines at Laboratory Scale

Power regulation of variable speed multi rotor wind systems using fuzzy cascaded control

Monitoring and control of a permanent magnet synchronous generator-based wind turbine applied to battery charging

Control, Modeling and Simulation on A Novel Regenerative Brake System of Electric Vehicle

Synergetic control for stand-alone permanent magnet synchronous generator driven by variable wind turbine

Active and reactive power vector control using neural-synergetic-super twisting controllers of induction generators for variable-speed contra-rotating wind turbine systems

Power control of an autonomous wind energy conversion system based on a permanent magnet synchronous generator with integrated pumping storage

Control system with electronic braking capabilities for micro wind turbines