Abstract:Background: The COVID19 epidemic highlighted the importance of air in the transmission of pathogens. Air disinfection is one of the key points to reduce the risk of transmission both in the health sector and in public, civil and industrial environments. All bacteria and viruses tested to date can be inactivated by UV-C rays. Laboratory tested UV-C systems are increasingly popular and proposed as effective technologies for air purification; few studies have evaluated their performance in populated indoor environments. The aim of this investigation was to evaluate the effectiveness of a UV-C disinfection system for air in a real working context. Methods: This experimental study was conducted between December 2020 and February 2021 in an office of the Department of Molecular and Developmental Medicine of the University of Siena, Italy. A pre-final version air purifier (Cleaning Air T12), capable of treating 210 m3/h of air, was first tested for its ability to filter particulates and reduce microbial air contamination in the absence of people. Subsequently, the experiments were conducted in the presence of 3-5 subjects who worked for several hours in an office. During the tests, microbiological samples of air were collected in real time, switching the system on and off periodically. Air samples were collected and incubated on Petri dishes at 36 °C and 22 °C. Statistical analysis was performed with Stata 16 software assuming a significance level of 95%. An interpolating model was identified to describe the dynamics of contamination reduction when the device operates. Results: Preliminary tests showed a significant 62.5% reduction in Colony-Forming Units (CFUs) with 36 °C incubation. Reductions in the particulate component were also observed. In the main test, comparison of CFU data, between the device-on phase (90 min) and the subsequent device-off phase (60 min), showed statistically significant increase (p = 0.001) of environmental contamination passing from a mean of 86.6 (65.8-107.4) to 171.1 (143.9-198.3) CFU/m3, that is a rise of about 100%. The interpolating model exhibited a good fit of CFU reduction trend with the device on. Conclusions: The system, which mainly uses UV-C lamps for disinfection, was able to significantly reduce environmental and human contamination in real time. Experimental tests have shown that as soon as the device is switched off, after at least half an hour of operation, the healthiness of the air decreases drastically within 10 minutes, bringing the airborne microbial contamination (induced by the presence of operators in the environment) to levels even higher than 150% of the last value with the device on. Re-engineering strategies for system improvement were also discussed.

Influence of Germicidal UV (222 nm) Lamps on Ozone, Ultrafine Particles, and Volatile Organic Compounds in Indoor Office Spaces

Indoor Air Quality Implications of Germicidal 222 nm Light

Effects of Germicidal Far-UVC on Indoor Air Quality in an Office Setting

Ozone generation and chemistry from 222 nm germicidal ultraviolet light in a fragrant restroom

Effects of Germicidal Far-UVC on Indoor Air Quality in a Conference Room

Organic aerosol formation from 222 nm germicidal light: ozone-initiated vs. non-ozone pathways

Human exposure to air contaminants under the far-UVC system operation in an office: effects of lamp position and ventilation condition

Evaluation of Germicidal Ultraviolet-C disinfection in a Real-World Outpatient Healthcare Environment

Evaluation of multiple fixed in-room air cleaners with ultraviolet germicidal irradiation, in high-occupancy areas of selected commercial indoor environments

Formation and Transport of Secondary Contaminants Associated with Germicidal Ultraviolet Light Systems in an Occupied Classroom

Experimental and numerical study on upper-room Far-UVC system under different ventilation schemes to disinfect airborne microorganisms in indoor environments

Field study of early implementation of UV sources and their relative effectiveness for public health and safety

Assessing the safety of new germicidal far-UVC technologies

Turn Up the Lights, Leave them On and Shine them All Around—Numerical Simulations Point the Way to more Efficient Use of Far‐UVC Lights for the Inactivation of Airborne Coronavirus

Reconciling airborne disease transmission concerns with energy saving requirements: the potential of UV-C pathogen deactivation and air distribution optimization

Estimation of the UV susceptibility of aerosolized SARS-CoV-2 to 254 nm irradiation using CFD-based room disinfection simulations

Far UV-C radiation: An emerging tool for pandemic control

The Efficacy of Vacuum-Ultraviolet Light Disinfection of Some Common Environmental Pathogens.

Effect of ventilation strategy on performance of upper-room ultraviolet germicidal irradiation (UVGI) system in a learning environment

Wind of change: Better air for microbial environmental control

Investigations on the surface disinfection efficacy of far-UVC 222 nm germicidal irradiance device in a controlled environment and field test