Influence of phosphorus on ash fouling deposition of hydrothermal carbonization sewage sludge fuel via drop tube furnace combustion experiments

Joo Chang Park,Hueon Namkung,Sang-Phil Yoon,Hong Seok Seo,Li-Hua Xu,Hyung-Taek Kim

DOI: https://doi.org/10.1016/j.joei.2020.07.014

IF: 6.47

2020-12-01

Journal of the Energy Institute

Abstract:<p>Phosphorus effect on ash fouling deposition produced during combustion process of sewage sludge solid fuel is a very important factor. Previous studies have only focused on decrease of the ash melting temperature and increase of slagging and sintering by phosphorus content. Therefore, research regarding combustion fouling formation and its effect on temperature reduction of deposit surface by phosphorus content is insufficient. Ash fouling is an important factor, because ash in the combustion boiler process deposits on the surface of heat exchanger and interferes with heat exchange efficiency. In particular, temperature reduction of heat exchanger surface via fouling should be considered together with fouling deposition, because this is related to the heat exchanger efficiency. Synthetic ash, phosphorus vaporization, and drop tube furnace experiments were performed to investigate effect of phosphorus on ash fouling formation and temperature reduction of deposit surface under combustion condition. Phosphorus was highly reactive and reacted with ash minerals to produce mineral phosphate, which promoted ash fouling deposition during the combustion experiments. In contrast, the occurrence of sintering on deposited fouling resulted in formation of a large hollow structure, which alleviated the temperature reduction on the deposit surface. Phosphorus content had a substantial correlation with fouling deposition behavior and influenced reduction in the surface temperature of the heat exchanger, because it led to generating low temperature mineral phases.</p>

energy & fuels

What problem does this paper attempt to address?

The paper attempts to address the issue of phosphorus's impact on ash deposition during the combustion of hydrothermally carbonized sludge fuel. Specifically, the study focuses on how phosphorus affects the formation of ash deposits and the reduction of surface temperature during combustion. Previous research has mainly concentrated on the effects of phosphorus content on lowering ash melting points, increasing slagging, and sintering. However, studies on the impact of phosphorus content on ash deposition formation and its effect on surface temperature reduction during combustion are relatively insufficient. Therefore, this paper explores the influence of phosphorus on ash deposition formation and surface temperature reduction under combustion conditions through synthetic ash, phosphorus volatilization experiments, and drop tube furnace experiments.

### Research Background and Objectives:
1. **Background**: With the increasing global demand for renewable energy, hydrothermally carbonized (HTC) sludge solid fuel has attracted attention as an alternative energy source. However, this fuel generates a large amount of ash and phosphorus during combustion, leading to ash deposition issues that affect boiler heat exchange efficiency.
2. **Objective**: To provide scientific evidence for solving this problem by experimentally studying the impact of phosphorus on ash deposition formation and surface temperature reduction during combustion.

### Main Research Content:
1. **Synthetic Ash Experiment**: By mixing different mineral oxides and phosphorus pentoxide (P₂O₅), the ash deposition behavior under high-temperature reaction conditions is simulated, and the reaction products of phosphorus with mineral components and their impact on ash deposition are analyzed.
2. **Phosphorus Volatilization Experiment**: Using a muffle furnace to heat sludge samples, the volatilization characteristics of phosphorus at different temperatures are analyzed, and the impact of volatilized phosphorus condensing on the heat exchanger surface on ash deposition is explored.
3. **Drop Tube Furnace Experiment**: By simulating high-temperature combustion conditions in a drop tube furnace, the ash produced during combustion is collected, the weight of ash deposits and surface temperature changes are measured, and the impact of phosphorus content in different sludge fuels on ash deposition rate and surface temperature is analyzed.

### Research Methods:
1. **Sample Preparation**: Three sludge solid fuel samples with different phosphorus and mineral content are selected, pretreated, and analyzed.
2. **Synthetic Ash Experiment**: High-temperature heating reactions are conducted in a muffle furnace to observe and analyze the physical changes and chemical composition of ash deposits.
3. **Phosphorus Volatilization Experiment**: Sludge samples are heated in a muffle furnace to analyze the volatilization of phosphorus at different temperatures.
4. **Drop Tube Furnace Experiment**: The combustion process is simulated in a drop tube furnace, ash is collected, and surface temperature changes are measured.

### Research Results:
1. **Synthetic Ash Experiment**: Phosphorus reacts with various mineral oxides to form low-melting-point phosphates, reducing the ash melting point and promoting ash deposition formation.
2. **Phosphorus Volatilization Experiment**: Phosphorus volatilizes in the range of 600-1000°C, and the volatilized phosphorus condenses on the heat exchanger surface, forming a sticky surface that promotes ash deposition.
3. **Drop Tube Furnace Experiment**: Sludge fuel with high phosphorus content forms ash deposits at a higher rate during combustion, but the surface temperature reduction is less, which is related to the sintering behavior caused by phosphorus. The porous structure formed by sintering alleviates the reduction in surface temperature.

### Conclusion:
Phosphorus has a significant impact on ash deposition formation and surface temperature reduction during the combustion of sludge fuel. Phosphorus reacts with mineral components to form low-melting-point phosphates, promoting ash deposition formation. Meanwhile, the volatilization and re-condensation behavior of phosphorus also promote the initial formation of ash deposits. These findings provide important scientific evidence for optimizing the combustion process of sludge fuel and reducing ash deposition issues.