Abstract:Carbon nanotubes (CNTs) have excellent mechanical properties and outstanding aspect ratios, which could remarkably impact the concrete's properties. This research investigates the influence of four different aspect ratios of CNTs with two dosages (i.e., 0.09% and 0.15%, by weight of cement) on hydration, macro performance, and microstructure of low-carbon sulfoaluminate cement-based composite. The experimental results show that adding different aspect ratios of CNTs can enhance the macro performance of the composite. The SM2 (short-CNTs with 0.15% content) group with a small aspect ratio (50–100) has better flexural strength and compressive strength than M0 (plain group), which is increased by 32.7% and 37.0%, respectively, the hydration degree of C 4 A 3 Š (ye'elimite) and C 2 S (belit) are increased by 19.9% and 57.3% than that of the M0 group. At low dosages (0.09%), LM1 (long-CNTs with an aspect ration of 250–1500) and LM2 (long-CNTs with an aspect ration of 125–750) improved the flexural strength of UHPC more than SM1 (short-CNTs with an aspect ration of 100–200). However, LM1 (long-CNTs with a large aspect ratio of 250–1500) has a better enhancement at a dosage of 0.09% than 0.15%. CNTs mainly accelerated the hydration process of the matrix and promoted the generation of more AFt, AH 3 . AFt is a needle-like fiber, and the increase in content is beneficial to improve the toughness and flexural strength of the matrix. The increase in AH 3 content can improve the compressive strength of the matrix. The AH 3 phase can be filled into the pores of the matrix, thereby increasing the compatibility of the matrix and improving the pore structure. The increase in the content of the two hydration products can synergistically enhance the mechanical properties of the matrix. AH 3 is closely connected to CNTs, which can improve the bond strength between the matrix and CNTs. It is observed that AFt is closely associated with AH 3 , filling the pores of the matrix, and the nanoscale AFt, AH 3 , and CNTs work together to improve the strength of the matrix, which differs from the effect of CNTs in OPC. This research prepares UHPC from low-carbon cement, which effectively enhances the life cycle of concrete materials and provides a new idea for reducing carbon emissions.

Cathodic protection of reinforced concrete facilitated by using CNT-CF/cement-based auxiliary anode

Carbon enhanced cementitious coatings: Alternative anode materials for impressed current cathodic protection systems intended for reinforced concrete

Computational Approach to the Current and Chloride Ions Distribution of Reinforced Concrete Cathodic Protection System

Effect of Carbon Nanotubes on Chloride Diffusion, Strength, and Microstructure of Ultra-High Performance Concrete

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

Effect of carbon nanotube content and annealing temperature on corrosion performance of carbon nanotube/Ni composite layer

Preparation and Performance of Carbon Nanotube Modified Cement-Based Phase Change Material in Steel Bridge Engineering

Cementitious composites modified by nanocarbon fillers with cooperation effect possessing excellent self-sensing properties

Carbon nanotube polymer nanocomposites coated aggregate enabled highly conductive concrete for structural health monitoring

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Effect of ICCP on Tensile Performance of Carbon Fiber Bundles in Seawater Sea-sand Cementitious Matrix

Understanding the role of carbon nanotubes in low-carbon concrete: From experiment to molecular dynamics

Enhanced Protective Performance of Carbon Nanotube-Reinforced Waterborne Epoxy Zinc-Rich Coatings for Corrosion Protection of Steel Structures

Understanding the role of carbon nanotubes in low carbon sulfoaluminate cement-based composite

Carbon nanotubes-coated cement particles for cement-based sensors with excellent piezoresistivity

Insight into dynamic compressive response of carbon nanotube/carbon fiber-reinforced concrete

Developments and Applications of Carbon Nanotube Reinforced Cement-Based Composites as Functional Building Materials

Early stage beneficial effects of cathodic protection in concrete structures

Study of Crevice Corrosion Behavior and Cathodic Protection of Carbon Steel Reinforcement in Concrete

Research on Performance Deterioration of Multi-Walled Carbon Nanotube–Lithium Slag Concrete under the Coupling Effect of Sulfate Attack and Dry–Wet Cycles

Monitoring damage of concrete beams via self-sensing cement mortar coating with carbon nanotube-nano carbon black composite fillers