Abstract:Direct numerical simulations (DNS) of particle-laden turbulent flow in straight, mildly curved and strongly bent pipes are performed in which the solid phase is modelled as small heavy spherical particles. A total of seven populations of dilute particles with different Stokes numbers, one-way coupled with their carrier phase, are simulated. The objective is to examine the effect of the curvature on micro-particle transport and accumulation. It is shown that even a slight non-zero curvature in the flow configuration strongly impact the particle concentration map such that the concentration of inertial particles with bulk Stokes number 0.45 (based on bulk velocity and pipe radius) at the inner-bend wall of mildly curved pipe becomes 12.8 times larger than that in the viscous sublayer of the straight pipe. Near-wall helicoidal particle streaks are observed in the curved configurations with their inclination varying with the strength of the secondary motion of the carrier phase. A reflection layer, as previously observed in particle laden turbulent S-shaped channels, is also apparent in the strongly curved pipe with heavy particles. In addition, depending on the curvature, the central regions of the mean Dean vortices appear to be completely depleted of particles, as observed also in the partially re-laminarised region at the inner bend. The turbophoretic drift of the particles is shown to be affected by weak and strong secondary motions of the carrier phase and geometry-induced centrifugal forces. The first and second-order moments of the velocity and acceleration of the particulate phase in the same configurations are addressed in a companion paper by the same authors. The current data-set will be useful for modelling particles advected in wall-bounded turbulent flows where the effects of the curvature are not negligible.

Numerical assessment of particle deposition reduction in turbulent bend pipe flow with a rib insertion

Numerical study of deposition rates of monodisperse particles in curved pipes with different expansion or shrinkage variables

Numerical investigation of a new method for reducing bends erosion from particles impacts

Research on the transport and deposition of nanoparticles in a rotating curved pipe

Research on Deposition and Orientation Characteristics of Cylindrical Particles in Gas-Solid 2-Phase Turbulent Flow in Curved Tubes

Numerical study of turbulent heat transfer and particle deposition in enhanced pipes with helical roughness

Numerical Analysis of Turbulence Characteristics in a Flat-Plate Flow with Riblets Control

Numerical investigation on flow characteristics in ribbed bend

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

Numerical Characterization of the Solid Particle Accumulation in a Turbulent Flow through Curved Pipes by Means of Stokes Numbers

Sedimentation effects on particle position and inertial deposition in 90° circular bends

Research On Reducing Erosion By Adding Ribs On The Wall In Particulate Two-Phase Flows

Antierosion in a 90° Bend by Particle Impaction

Nanoparticle Distribution in A Rotating Curved Pipe Considering Coagulation and Dispersion

Numerical analysis of jet impingement cooling with elongated nozzle holes on a curved surface roughened with V-shaped ribs

Particle transport in turbulent curved pipe flow

Transport and Deposition of Nanoparticles in Bend Tube with Circular Cross-Section

Prediction of Nanoparticle Transport and Deposition in Bends

Investigation of particle deposition efficiency enhancement in turbulent duct air flow by surface ribs with hybrid-size ribs

Numerical study of particle deposition characteristics in a new type of reinforced pipe

Distribution and Deposition of Cylindrical Nanoparticles in a Turbulent Pipe Flow