Effective application of green nano adsorbent on the removal of carbofuran from wastewater

N. M. Aboeleneen Nabil M. AbdelMonem Riham Atef a Chemical Engineering Department,Higher Institute of Engineering and Technology,New Damietta,Damietta,Egyptb Chemical Engineering Department,Faculty of Engineering,Cairo University,Cairo,Egypt

DOI: https://doi.org/10.1080/00986445.2024.2406027

2024-09-21

Chemical Engineering Communications

Abstract:In this study, carbofuran (CF) was eliminated from wastewater using pomegranate peel nano adsorbent (PPNA). Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) before and after adsorption were used to assess the process efficiency. BET demonstrated that the PPNA has a specific surface area of 356.5 m 2 /g. The PPNA was tested under some environmental factors, such as contact time, concentration, adsorbent dose, temperature, and pH. Experimental work was done within the range of 10–50 mg/l initial concentration and the best biosorption capacities were found at 30 min contact time, 0.7 g adsorbent dose, 25 °C, and pH 2. The Freundlich isotherm was the best-fitting isotherm model. The pseudo-second-order model provided the best fit to the process kinetics and indicated that the intra-particle diffusion stage is the rate-limiting step for the process. The study of thermodynamics showed that carbofuran adsorption on PPNA was physisorption (Δ G = −3.2334 kJ/mol) and spontaneous at high temperatures (Δ H = 22.2058 kJ/mol, Δ S = 85.0355 J/mol K). Design of a single-stage batch adsorber for the adsorption of CF from aqueous liquors using PPNA was also done.

engineering, chemical