Abstract:Chlorinated organic and phenolic compounds are still purely studied by many researchers because of their severe damage to the aquatic environment and their carcinogenic effect on many living organisms. Therefore, there is a great interest in removing these environmental pollutants from aqueous mediums by easy and inexpensive methods. Herein, novel nickel ferrite (NiFe2O4) nano composite modified with poly(aniline-co-o-toluidine) (PAOT) is prepared, characterized, and used for the removal of 2,4-dichlorophenol (2,4-DCP) as an organic chlorinated environmental pollutant. The morphological properties of the composite are characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and Brunauer-Emmett-Teller (BET) methods. The prepared composite is tested for the removal of the hazardous dichlorophenol pollutant from aqueous solutions. Under optimized conditions and with effective control of parameters including, contact time, pH of the test solution, adsorbent dose, and temperature, over 83% of the pollutant is adsorbed and removed. The adsorption capacity is 162 mg g-1. Adsorption kinetics, adsorption isotherm and some physicochemical parameters of the reaction are evaluated. The Redlich-Peterson isothermal model is the appropriate model for describing the adsorption process. These results indicate that NiFe2O4/PAOT nanocomposites are promising adsorbents for the removal of persistent organic pollutants (e.g., DCP) from aqueous solutions. The results also reveal that modification of NiFe2O4 particles with poly(aniline-co-o-toluidine) (PAOT) significantly enhances the adsorption capacity of the adsorbent. This is probably due to the electrostatic attraction and non-covalent interactions (e.g. π-π) between the aromatic rings in both dichlorophenol and poly(aniline-co-o-toluidine) copolymer. Advantages offered by using NiFe2O4/PAOT nanocomposites are the high stability, reasonable efficiency, reusability for at least five adsorption-desorption cycles and the ability to remove the adsorbent from aqueous solutions for reuse using an external magnetic field.

Adsorption of nitrophenol onto a novel Fe3O4-κ-carrageenan/MIL-125(Ti) composite: process optimization, isotherms, kinetics, and mechanism

Adsorption of 4-Nitrophenol onto Iron Oxide Bentonite Nanocomposite: Process Optimization, Kinetics, Isotherms and Mechanism

Novel magnetic nickel ferrite nanoparticles modified with poly(aniline- co-o-toluidine) for the removal of hazardous 2,4-dichlorophenol pollutant from aqueous solutions

Adsorption and Catalytic Degradation by CoFe2O4 Coated on Metal–organic Framework for the Removal of 4-Nitrophenol and 2,4-Dichlorophenol

Magnetic Iron Oxide Nanoparticles Functionalized Multi-Walled Carbon Nanotubes for Toluene, Ethylbenzene and Xylene Removal from Aqueous Solution

Enhanced Adsorptive Removal of P-Nitrophenol from Water by Aluminum Metal–organic Framework/reduced Graphene Oxide Composite

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

Preparation, characterization and evaluation of nano manganese dioxide coated on alumina as a new adsorbent for the effective removal of phenol from aqueous samples

Removal of 1-Naphthylamine from Aqueous Solution by Multiwall Carbon Nanotubes/iron Oxides/cyclodextrin Composite.

Preparation of GO/COFs composites by interlayer-confined strategy for the adsorption of nitro aromatic pollutants

Effective adsorption and catalytic reduction of nitrophenols by amino-rich Cu(I)–I coordination polymer

Magnetic Porous Silica–graphene Oxide Hybrid Composite As a Potential Adsorbent for Aqueous Removal of P-Nitrophenol

Synthesis of iron oxide nanoparticles encapsulated poly(styrene‐co‐4‐vinyl pyridine) nanocomposites for column adsorption and photocatalytic degradation of para nitrophenol from water

Multiple Phenolic Hydroxyl-Modified Hyper-Crosslinked Polymers and Their Efficient Adsorptive Removal of O-Nitrophenol from Water

Biosynthesis and Analytical Characterization of Iron Oxide Nanobiocomposite for In-Depth Adsorption Strategy for the Removal of Toxic Metals from Drinking Water

Preparation of a Novel Magnetic Microporous Adsorbent and Its Adsorption Behavior of P-Nitrophenol and Chlorotetracycline.

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

Sono-assisted adsorption of nitrate by Fe-modified chitosan–zeolite composite material

Adsorptive removal of organic pollutants from aqueous solutions using novel GO/bentonite/MgFeAl-LTH nanocomposite

Removal and adsorption of p-nitrophenol from aqueous solutions using carbon nanotubes and their composites

Simultaneous Organic/inorganic Removal from Water Using a New Nanocomposite Adsorbent: A Case Study of P-Nitrophenol and Phosphate