Abstract:Background Boron neutron capture therapy (BNCT) is a next‐generation radiotherapy, utilizing both an external neutron beam and a 10B ‐containing pharmaceutical. A compact accelerator for a high intensity neutron source was installed to conduct BNCT in a hospital. The dose administered to a patient was evaluated by measuring the proton beam current. Purpose Neutron intensity should be monitored in real‐time by measuring the neutrons emitted from the target during BNCT irradiation. This is crucial due to potential neutron target degradation. Online neutron beam monitoring systems are required for reliable measurements of the administered neutron dose. An online neutron beam monitoring system was developed to monitor neutron intensity irradiating on the patient at the National Cancer Center Hospital (NCCH). Methods The neutron detector comprised a back‐illuminated thin Si diode of 40‐μm thickness and an ultrathin natural LiF neutron converter of 0.05‐μm thickness. The neutron detector was installed on the neutron target unit, regardless of whether a patient was present, without any additional modifications to the setup. The response functions for high photon dose rates of upto 100 Gy/h were measured. The pulse heights were measured using the neutron beam monitor during BNCT neutron irradiation. Neutron temporal response measured using the online beam monitor was acquired and compared with the proton beam current and the measurements at a patient position. From this measurement at the patient position, the neutron fluence rate irradiating on a patient was obtained. Results The neutron events were separated from the photon events. The neutron counting rates increased rapidly with the starting of proton beam irradiation and dropped to zero upon its termination. During intermittent drops and recoveries in the proton beam, the neutron beam monitor for counting rates responded quickly, synchronizing with the beam current. A scatter plot of the neutron counting rate and proton beam current indicated a good linear correlation. A direct relationship between the online neutron beam monitor's neutron counting rates and those of the patient neutron detector showed a good correlation coefficient of 0.84. A ratio of the both neutron counting rates showed a standard deviation of 6%. The correlation coefficient and standard deviation were improved to 0.94 and 1.5%, by re‐binning the neutron temporal response with longer acquisition period than 1 s. Using the online neutron beam monitor, the neutron fluence rate was obtained from the direct relationship within 1.5%. Therefore, real‐time monitoring of neutron intensity was achieved within the acceptable level as per the International Commission on Radiation Units and Measurements report. Conclusions The online neutron beam monitoring system was developed to monitor the BNCT neutron beam intensity at NCCH. The temporal response of the neutron beam monitor was synchronized with the neutron counting rate at the patient position. Using the online neutron beam monitor, the neutron fluence rate irradiating on the patient can be monitored from the direct relationship. Fluctuation of the neutron beam intensity through BNCT irradiation and the degradation of the lithium target through the lifespan of the neutron target could be monitored using the neutron beam monitor.

A design study for an accelerator-based epithermal neutron beam for BNCT

An experimental study of the moderator assembly for a low-energy proton accelerator neutron irradiation facility for BNCT

Design of a mixed material moderator in a beam-shaping assembly for proton accelerator-based boron neutron capture therapy

Study on novel neutron irradiation without beam shaping assembly in Boron Neutron Capture Therapy

New data for the definition of neutron beams for Boron Neutron capture therapy

Conceptional design of an adjustable moderator for BNCT based on a neutron source of 2.8 MeV proton bombarding with Li target

Design of Beam Shaping Assemblies for Accelerator-Based BNCT With Multi-Terminals

Optimized beam shaping assembly for a 2.1-MeV proton-accelerator-based neutron source for boron neutron capture therapy

Optimization of the epithermal neutron beam for Boron Neutron Capture Therapy at the Brookhaven Medical Research Reactor

Optimization of dd110 neutron generator output for boron neutron capture therapy

Radiation protection aspects in the design of a Boron Neutron Capture Therapy irradiation room

Characterization Of~7li(p,n)~7be Neutron Yields from an Accelerator for Boron Neutron Capture Therapy

Study of the out-of-field dose from an accelerator-based neutron source for boron neutron capture therapy

Improvement of Dose Distribution in Phantom by Using Epithermal Neutron Source Based on the Be(P,N) Reaction Using A 30 Mev Proton Cyclotron Accelerator

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

High-power electron beam tests of a liquid-lithium target and characterization study of (7)Li(p,n) near-threshold neutrons for accelerator-based boron neutron capture therapy

Neutron spectroscopy for Boron Neutron Capture Therapy beams characterization

On the eptihermal neutron energy limit for Accelerator-Based Boron Neutron Capture Therapy (AB-BNCT): Study and impact of new energy limits

Real-time neutron beam monitor utilizing scintillator technology for boron neutron capture therapy

Development of an online neutron beam monitoring system for accelerator‐based boron neutron capture therapy in a hospital

The Development of Boron Analysis and Imaging in Boron Neutron Capture Therapy (BNCT)