Abstract:The rapid development of 3D printing technology and the emerging applications of shape memory elastomer have greatly stimulated the research of photocurable polymers. In this work, glycerol (Gly) was polycondensed with sebacic, dodecanedioic, or tetradecanedioic acids to provide precursor polyesters with hydroxyl or carboxyl terminal groups, which were further chemically functionalized by acryloyl chloride to introduce sufficient, photocurable, and unsaturated double bonds. The chemical structures of the acrylated polyesters were characterized by FT IR and NMR spectroscopies. The photoinitiated crosslinking behavior of the acrylated polyesters under ultraviolet irradiation without the addition of any photoinitiator was investigated. The results showed that the precursor polyesters that had a greater number of terminated hydroxyls and a less branched structure obtained a relatively high acetylation degree. A longer chain of aliphatic dicarboxylic acids (ADCAs) and higher ADCA proportion lead to a relatively lower photopolymerization rate of acrylated polyesters. However, the photocured elastomers with a higher ADCA proportion or longer-chain ADCAs resulted in better mechanical properties and a lower degradation rate. The glass transition temperature (Tg) of the elastomer increased with the alkyl chain length of the ADCAs, and a higher Gly proportion resulted in a lower Tg of the elastomer due to its higher crosslinking density. Thermal gravimetric analysis (TGA) showed that the chain length of the ADCAs and the molar ratio of Gly to ADCAs had less of an effect on the thermal stability of the elastomer. As the physicochemical properties can be adjusted by choosing the alkyl chain length of the ADCAs, as well as changing the ratio of Gly:ADCA, the photocurable polyesters are expected to be applied in multiple fields.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is how to improve the performance of polyester materials through photocuring technology to meet the requirements of 3D printing technology and emerging applications of shape - memory polymer networks. Specifically, the author solves the problem in the following ways: 1. **Synthesis of photocurable polymers**: Precursor polyesters with hydroxyl or carboxyl end groups are prepared by condensation reaction of glycerol (Gly) with aliphatic dicarboxylic acids (such as sebacic acid, dodecanedioic acid and tetradecanedioic acid). These precursor polyesters are further chemically functionalized by acryloyl chloride to introduce sufficient photocurable unsaturated double bonds. 2. **Study of the relationship between structure and properties**: The chemical structure of acrylated polyesters is characterized by Fourier transform infrared spectroscopy (FT - IR) and nuclear magnetic resonance (NMR) spectroscopy. The photo - initiated cross - linking behavior of acrylated polyesters under ultraviolet irradiation is studied without adding any photo - initiator. 3. **Optimization of material properties**: The effects of aliphatic dicarboxylic acids (ADCAs) with different chain lengths and the ratio of glycerol to ADCAs on the photocuring rate, mechanical properties and degradation rate are studied. The results show that: - Precursor polyesters with more terminal hydroxyl groups and less branched structures achieve a higher degree of acetylation. - Longer - chain ADCAs and a higher ADCA ratio lead to a lower photopolymerization rate. - Photocured elastomers with a higher ADCA ratio or longer - chain ADCAs exhibit better mechanical properties and a lower degradation rate. - The glass transition temperature (\(T_g\)) increases as the alkyl chain length of ADCAs increases, while a higher glycerol ratio results in a lower \(T_g\) due to its higher cross - linking density. 4. **Thermal stability analysis**: It is found by thermogravimetric analysis (TGA) that the chain length of ADCAs and the molar ratio of glycerol to ADCAs have little effect on the thermal stability of elastomers. 5. **Potential for multi - functional applications**: By selecting different ADCA chain lengths and changing the ratio of glycerol to ADCAs, the physicochemical properties of photocured polyesters can be adjusted, making them have application potential in multiple fields. In summary, this paper aims to develop an efficient photocured polyester material and reveal the relationship between its structure and properties through systematic research, providing new material options for 3D printing and shape - memory polymer applications.

Synthesis and Properties of Photocurable Polymers Derived from the Polyesters of Glycerol and Aliphatic Dicarboxylic Acids

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

High Molecular Weight Polyesters Derived from Biobased 1,5-Pentanediol and a Variety of Aliphatic Diacids: Synthesis, Characterization, and Thermo-Mechanical Properties

Synthesis and Photopolymerization Kinetics of a Novel Monomer: 1,4-Butanediol Bis(alpha-Trimethylsiloxyacrylate): Steric Effect of the alpha-Trimethylsiloxy Substituent on the Reaction Kinetics

Photopolymerized and acetylene-functionlized polyacrylates for photoclickable elastomers

Synthesis, characterization and in vitro degradation of a new family of alternate poly(ester-anhydrides) based on aliphatic and aromatic diacids

Photo-cross-linked hydrogels from thermoresponsive PEGMEMA-PPGMA-EGDMA copolymers containing multiple methacrylate groups: mechanical property, swelling, protein release, and cytotoxicity.

Systematic Modulation and Structure–Property Relationships in Photopolymerizable Thermoplastics

Photopolymerization Pattern of New Methacrylate Cellulose Acetate Derivatives

Design and Depolymerization of Bis(2‐hydroxyethyl) Terephthalate‐Containing Polyurethanes for Vat Photopolymerization

Preparation and Characterization of a Biodegradable Polyester Elastomer with Thermal Processing Abilities

Synthesis and properties of a low-viscosity UV-curable oligomer for three-dimensional printing

Synthesis and characterization of a polyester based on citric acid/ethylene glycol/glycerol

The Effect of Heat Treatment toward Glycerol-Based, Photocurable Polymeric Scaffold: Mechanical, Degradation and Biocompatibility

Glycerol Acrylate-Based Photopolymers with Antimicrobial and Shape-Memory Properties

Preparation and characterization of photocurable fluorinated polyether‐based reactive inks

Aliphatic polyesters based on 1,4-butanediol and even numbered C4 - C20 dicarboxylic acids - synthesis and properties including after surface treatment by VUV photo-oxidation

Synthesis and Curing of Acrylate Terminated Hyperbranched Polyester

Thermoresponsive and photocrosslinkable PEGMEMA-PPGMA-EGDMA copolymers from a one-step ATRP synthesis

Synthesis and properties of UV-curable polyester acrylate resins from biodegradable poly(l-lactide) and poly(ε-caprolactone)

Digital Light Processing (DLP) 3D Printing of Caprolactone Copolymers with Tailored Properties through Crystallinity