Abstract:The centrifugal compressor is widely used for gas compression in various industrial fields such as aero-engine, gas turbine and turbocharger. However, the stable operating range is usually restricted by the occurrence of flow instability such as stall and surge. The paper experimentally examines the developing process of surge and stall occurring in a centrifugal compressor to advance the understanding on flow mechanism of flow instability. It is found that three types of pressure fluctuation can be observed at low flowrate region. At the critical point, the local stall firstly occurs in some specific diffuser passages and the enlarged local diffuser stall eventually induces the mild surge of compression system indicated by the sinusoidal pressure fluctuation. At lower mass flow rate, the diffuser stall cell begins to circumferentially propagate along the impeller rotating direction at 11% of rotor speed with the existence of mild surge. In comparative analysis of IGV pre-swirl angle on the occurrence of mild surge, the mild surge still occurs at the operating condition when the slope of the characteristic map of test stage is still obviously negative, in which the compression system is supposed to be stable in previous study. And a new suggested criterion for the prediction of mild surge is demonstrated that the occurrence of mild surge depends on the destabi-lization effect of downstream components about diffuser and volute. Combined with the experimental data, the streamwise distribution characteristic of diffuser stall can be used to develop the simplified model of lumped parameters for the analysis on the generation mechanism of the diffuser rotating stall. The quantitative investigation on the relation between the pressure-rise characteristic of subcomponents and the occurrence of mild surge and diffuser rotating stall not only advances the prediction of stability limit but also lays the theoretic foundation for controlling these unsteady behaviors to improve the operating range.

Non-synchronous vibration of rotor blade in a six-stage transonic compressor

Experimental and Numerical Investigation of Non-synchronous Blade Vibration Excitation in a Transonic Axial Compressor

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Experimental and numerical investigations on non-synchronous vibration and frequency lock-in of transonic compressor rotor blades

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Numerical Simulation on Unsteady Flow Mechanism of a 1.5-Stage Axial Transonic Compressor

Numerical Investigations on Non-Synchronous Vibration and Frequency Lock-in of Low-Pressure Steam Turbine Last Stage

Numerical simulation of unsteady single-stage transonic axial compressor flow

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds

Numerical Investigation of the Unsteady Flow in a Transonic Compressor with Curved Rotors

Numerical Investigation of Compressor Rotor Blade Clocking Effects on Aerodynamic Loading of the Stator Vane

Unsteady Pressure Behavior on Blade Surface Induced by Wake-Blade Interaction in an Axial Compressor Stage

Effects of Rotor-Stator Interaction on Flow Field of a Transonic Boundary Layer Suction Compressor

Numerical Investigation of the Superimposed Effects on Stator Wake Oscillation in an Axial-Radial Combined Compressor

Relationship between Casing Pressure and Non-Synchronous Vibration in an Axial Compressor

Investigation on the Flow Field Entropy Structure of Non-Synchronous Blade Vibration in an Axial Turbocompressor

Experimental investigation of flow instability evolution in a low-speed two-stage axial compressor

The Loss Mechanisms and Vortex Dynamics of Rotor Platform Step Geometries in a Low-Speed Research Compressor Stage

Experimental and Numerical Study of Nonlinear Vibration in Compressor Stator Blade with Holding Ring Structure Considering Contact Friction

Numerical Research on Blade Dynamic Stress and Resonance under Different Rotor Circumferencial Positions in A Multi-stage Compressor