Boosting the Ion Mobility in Solid Polymer Electrolytes Using Hollow Polymer Nanospheres as an Additive
Yuhan Li,Yanyang Qin,Jianyun Zhao,Mingbo Ma,Mengzhu Zhang,Ping Li,Shiyao Lu,Huaitian Bu,Kai Xi,Yaqiong Su,Shujiang Ding,Yuhan Li,Yanyang Qin,Jianyun Zhao,Mingbo Ma,Mengzhu Zhang,Ping Li,Shiyao Lu,Huaitian Bu,Kai Xi,Yaqiong Su,Shujiang Ding
DOI: https://doi.org/10.1021/acsami.2c00244
2022-04-12
Abstract:Solid polymer electrolytes (SPEs) possess improved thermal and mechanical stability as safe energy storage devices. However, their low ion mobilities and poor electrochemical stabilities still hinder the wide industrial application of SPEs. Herein, we introduce an SPE design that provides an enormous number of electrochemically stable pathways and space for lithium-ion transport, blending polymer (polydopamine) hollow nanospheres with an inactive inorganic template into a poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based SPE. Hollow silica acts as a template for polydopamine processing a large contact area with the polymer electrolyte, and the interface between the polymer electrolyte and hollow composite fillers provides amounts of ion transport channels. In addition, theoretical calculations reveal a strong adsorption between polydopamine and TFSI–, which suppresses the TFSI– motion and meanwhile facilitates the selective Li+ transport. The hollow polydopamine can serve as a versatile platform for anion trapping and has large compatible and stable depression for a well-defined ion transfer interface layer, forming a three-in-one nanocomposite for the enhancement of ionic conductivity with no sacrifice of the mechanical properties. Experimental data confirmed the high mobility of ions within the composite electrolyte with an ionic conductivity of 0.189 mS cm–1 in comparison to the SPE without additives (0.105 mS cm–1) at 60 °C. The mobility of the Li+ increases after adding the polymer-coated inorganic additives, associated with a noticeable enlargement of the electrochemical window. Furthermore, an all-solid-state Li/LiFePO4 battery with a hollow polydopamine nanoparticle–polymer composite electrolyte shows long life, high reversible capacity (134.9 mAh g–1), and high capacity retention (97.2%) after 205 cycles at 0.2 C.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00244.SEM of pure PDA nanospheres, XPS of silica, PDA self-aggregation nanospheres, and the hollow PDA composite, SEM of CPEs, DSC of PEO, DSC of CPEs, stress–strain curves of CPEs, magnified EIS plots of CPEs at different temperature, EIS plots of Li/SPE/LFP and Li/CPE/LFP, equivalent circuits of Li/SPE/LFP and Li/CPE/LFP, FTIR peaks and corresponding assignments, mechanical data of CPEs, ionic conductivity values of CPEs, comparison of the electrochemical performance of batteries with similar electrolyte systems, and simulated impedance parameters (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology