Abstract:In search for new technology to preserve global warming caused by fossil fuel, solar energy driven devices have been high in demand. For instance, photovoltaics (PV) are a promising technology that can produce high power conversion efficiency (PCE). In addition, photoelectrochemical (PEC) water splitting, a promising artificial photosynthesis method, is a potential alternative technique to generate renewable fuel. PEC devices can generate renewable energy sources such as hydrogen, which can alleviate CO 2 emission from fossil fuels. However, most readily employed PEC devices require external bias to function as a hydrogen producer. Thus, utilizing PV active layer as a photo absorber, PEC system is a suitable approach to the breakthrough of efficient hydrogen production. In the past decade of PV technology advances, organic-inorganic lead halide perovskite (LHP) can be arguably the most progressive research because of its tunable bandgap, fast charge separation, broad light absorption spectra, low cost, facile fabrication, and high efficiency. These advantageous properties led LHPs to be used as an active layer of water splitting devices. However, LHP-based PECs have flaws to be addressed to be viable material for PEC. LHP are known for their fragile nature from exposure to water. Hence, LHP-based PECs are commonly protected with metal foil encapsulation while covering the edges with epoxy resins. However, the metal foil provides poor contact with the LHP leading to poor charge transfer for water splitting. To solve this problem, we applied carbon conductive powder (CCP) as the interlayer to successfully facilitate charge transfer. With the proposed device modeling, monolithic PEC device that is capable of generating hydrogen in presence of low external applied bias is fabricated. Nonetheless, single monolithic PEC devices still need external applied bias to function as water splitting device which seek for further research. Therefore, adding another photoelectrode will eliminate the necessity of external bias resulting in an only solar powered water splitting device. Herein, we report unassisted solar to hydrogen conversion by using inverted and planar type LHP solar cells as photocathode and photoanode, respectively. With the integration of catalyst, 3D Ni.NiFe and NiPCoP, LHP-based PEC with exceptional performance was attained. We demonstrated unbiased PEC water splitting using a coupled LHP-based photoelectrode under alkaline conditions. Each LHP-based photoelectrode exhibited a outstanding performance of 22.42 mA cm -2 at 1.23 V RHE and 21.96 mA cm -2 at 0 V RHE for the photoanode and photocathode, respectively. Thus, we achieved solar to hydrogen (STH) of 10.64% and unassisted photo-current density of 8.65 mA/cm 2 . In addition, unbiased catalytic reactivity over 20 h retaining about 60% of photo-current density was attained.

Super-hydrophilic electrode encapsulated lead halide-perovskite photoanode toward stable and efficient photoelectrochemical water splitting

Triple-Cation-Based Perovskite Photocathodes with AZO Protective Layer for Hydrogen Production Applications.

All-perovskite-based unassisted photoelectrochemical water splitting system for efficient, stable and scalable solar hydrogen production

Ultrastable halide perovskite CsPbBr3 photoanodes achieved with electrocatalytic glassy-carbon and boron-doped diamond sheets

Perovskite Oxide Based Electrodes for High‐Performance Photoelectrochemical Water Splitting

Transition metals-based electrocatalysts on super-flat substrate for perovskite photovoltaic hydrogen production with 13.75% solar to hydrogen efficiency

3D Porous Pyramid Heterostructure Array Realizing Efficient Photo‐Electrochemical Performance

High-performance Perovskite Photoanode Enabled by Ni Passivation and Catalysis.

An All-Inorganic Lead Halide Perovskite-Based Photocathode for Stable Water Reduction

Coupled Lead Halide Perovskite Photoelectrode for Unbiased Photoelectrochemical Water Splitting

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Stable Unbiased Photo‐Electrochemical Overall Water Splitting Exceeding 3% Efficiency via Covalent Triazine Framework/Metal Oxide Hybrid Photoelectrodes

Efficient and Stable Perovskite‐Based Photocathode for Photoelectrochemical Hydrogen Production

n‐ZrS3/p‐ZrOS Photoanodes with NiOOH/FeOOH Oxygen Evolution Catalysts for Photoelectrochemical Water Oxidation

An efficient and stable photoelectrochemical system with 9% solar-to-hydrogen conversion efficiency via InGaP/GaAs double junction

Highly efficient overall water splitting driven by all-inorganic perovskite solar cells and promoted by bifunctional bimetallic phosphide nanowire arrays

Overall photocatalytic water splitting by an organolead iodide crystalline material

Efficient and Ultrastable Iodide Oxidation Reaction Over Defect‐Passivated Perovskite Photoanode for Unassisted Solar Fuel Production

Recent Progress in Photoelectrochemical Water Splitting for Solar Hydrogen Production

Integrating Low‐Cost Earth‐Abundant Co‐Catalysts with Encapsulated Perovskite Solar Cells for Efficient and Stable Overall Solar Water Splitting

Engineering and Design of Halide Perovskite Photoelectrochemical Cells for Solar‐Driven Water Splitting