Abstract:In search for new technology to preserve global warming caused by fossil fuel, solar energy driven devices have been high in demand. For instance, photovoltaics (PV) are a promising technology that can produce high power conversion efficiency (PCE). In addition, photoelectrochemical (PEC) water splitting, a promising artificial photosynthesis method, is a potential alternative technique to generate renewable fuel. PEC devices can generate renewable energy sources such as hydrogen, which can alleviate CO 2 emission from fossil fuels. However, most readily employed PEC devices require external bias to function as a hydrogen producer. Thus, utilizing PV active layer as a photo absorber, PEC system is a suitable approach to the breakthrough of efficient hydrogen production. In the past decade of PV technology advances, organic-inorganic lead halide perovskite (LHP) can be arguably the most progressive research because of its tunable bandgap, fast charge separation, broad light absorption spectra, low cost, facile fabrication, and high efficiency. These advantageous properties led LHPs to be used as an active layer of water splitting devices. However, LHP-based PECs have flaws to be addressed to be viable material for PEC. LHP are known for their fragile nature from exposure to water. Hence, LHP-based PECs are commonly protected with metal foil encapsulation while covering the edges with epoxy resins. However, the metal foil provides poor contact with the LHP leading to poor charge transfer for water splitting. To solve this problem, we applied carbon conductive powder (CCP) as the interlayer to successfully facilitate charge transfer. With the proposed device modeling, monolithic PEC device that is capable of generating hydrogen in presence of low external applied bias is fabricated. Nonetheless, single monolithic PEC devices still need external applied bias to function as water splitting device which seek for further research. Therefore, adding another photoelectrode will eliminate the necessity of external bias resulting in an only solar powered water splitting device. Herein, we report unassisted solar to hydrogen conversion by using inverted and planar type LHP solar cells as photocathode and photoanode, respectively. With the integration of catalyst, 3D Ni.NiFe and NiPCoP, LHP-based PEC with exceptional performance was attained. We demonstrated unbiased PEC water splitting using a coupled LHP-based photoelectrode under alkaline conditions. Each LHP-based photoelectrode exhibited a outstanding performance of 22.42 mA cm -2 at 1.23 V RHE and 21.96 mA cm -2 at 0 V RHE for the photoanode and photocathode, respectively. Thus, we achieved solar to hydrogen (STH) of 10.64% and unassisted photo-current density of 8.65 mA/cm 2 . In addition, unbiased catalytic reactivity over 20 h retaining about 60% of photo-current density was attained.

High-performance Perovskite Photoanode Enabled by Ni Passivation and Catalysis.

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Super-hydrophilic electrode encapsulated lead halide-perovskite photoanode toward stable and efficient photoelectrochemical water splitting

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Engineering Single-Atomic Ni-N 4 -O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Efficient and Ultrastable Iodide Oxidation Reaction Over Defect‐Passivated Perovskite Photoanode for Unassisted Solar Fuel Production

All-perovskite-based unassisted photoelectrochemical water splitting system for efficient, stable and scalable solar hydrogen production

Nanoporous 6H-SiC Photoanodes with a Conformal Coating of Ni–FeOOH Nanorods for Zero-Onset-Potential Water Splitting

Surface passivated halide perovskite single-crystal for efficient photoelectrochemical synthesis of dimethoxydihydrofuran

Nickel Phosphide-Coupled Methylammonium Lead Halide as an Efficient and Stable Photocatalyst for Photocatalytic H2 Evolution from HI Splitting

Polydopamine and Nafion bi‐layer passivation modified CdS photoanode for photoelectrochemical hydrogen evolution

Ultrastable halide perovskite CsPbBr3 photoanodes achieved with electrocatalytic glassy-carbon and boron-doped diamond sheets

Highly Efficient and Stable Planar Perovskite Solar Cells with Modulated Diffusion Passivation Toward High Power Conversion Efficiency and Ultrahigh Fill Factor

Highly Efficient NiFe Nanoparticle Decorated Si Photoanode for Photoelectrochemical Water Oxidation

Highly efficient overall water splitting driven by all-inorganic perovskite solar cells and promoted by bifunctional bimetallic phosphide nanowire arrays

Coupled Lead Halide Perovskite Photoelectrode for Unbiased Photoelectrochemical Water Splitting

Silicon Photoanodes Partially Covered by Ni@Ni(Oh)(2) Core-Shell Particles for Photoelectrochemical Water Oxidation

Enhancing the photoelectrochemical performance of TiO2 photoanode by employing carbon nanoparticles as electron reservoirs and photothermal materials

Gas Molecule Assisted All-Inorganic Dual-Interface Passivation Strategy for High-Performance Perovskite Solar Cells

Integration of Inverse Nanocone Array Based Bismuth Vanadate Photoanodes and Bandgap-Tunable Perovskite Solar Cells for Efficient Self-Powered Solar Water Splitting

Transition metals-based electrocatalysts on super-flat substrate for perovskite photovoltaic hydrogen production with 13.75% solar to hydrogen efficiency