Abstract:Water flux is one of the most important performance parameters of the reverse osmosis (RO) membrane. The higher water flux means lower energy cost when treating the same volume of feed solution with membrane separation technology. However, the increase of membrane water flux always corresponds to the decrease of solvent rejection, known as the “trade-off” effect. In addition, the surface fouling of membranes is often a serious problem, as frequent cleaning not only increases the operating cost but also shortens the life of the membranes. Recently, various hydrophilic nanomaterials have been used to improve the performance of membranes. To fabricate thin film nanocomposite (TFN) RO membrane with high flux and antifouling performance, maleic anhydride-grafted graphene oxide (MG) was successfully synthesized and incorporated into the polyamide (PA) layer via the interfacial polymerization (IP) method. We performed the IP reaction with m-phenylenediamine (MPD) and trimesoyl chloride (TMC) as reactive monomers on a polysulfone (PSF) substrate, and acid absorbent (TEA) and surfactant (SDS) were added to improve the separation performance of the membrane. The effects of MG incorporation on the membrane morphology and separation performance were investigated. SEM and AFM results show that the surface of the MG membrane is rougher than that of the membrane without MG. In addition, excessive loading of MG will lead to aggregation of MG nanosheets. FT-IR spectra indicate that the interaction between MG and PA layers results in an increase of hydrophilic groups on the surface of the TFN membrane, which is further confirmed by the results of the contact angle. The optimal MG doping concentration in the aqueous solution is 0.004 wt%, the water flux of the resultant TFN membrane is significantly increased to 51 L·m-2·h-1, 150% higher than the blank control membrane, which also performs a higher NaCI rejection (97.5% vs. 96.6%). Furthermore, the MG-incorporated RO membrane exhibits superior antifouling performance compared with the blank control membrane.

Design of Laser Photothermal Conversion Membranes Based on Fluorinated Graphene

Freestanding Graphene Oxide-Polytetrafluoroethylene Membranes with Excellent Photothermic Performance for Laser Ignition

Graphene-clad Microfibre Saturable Absorber for Ultrafast Fibre Lasers.

Optimization of Laser-Induced Graphene Membrane for Simultaneous Photo- and Electro-thermal Membrane Distillation

Polytetrafluoroethylene‐intercalated MXene membranes with good photothermal performance for enhanced laser ignition

Nanosecond Laser Patterned Porous Graphene from Monolithic Mesoporous Carbon for High‐Performance Solar Thermal Interfacial Evaporation

Highly Efficient Laser Bidirectional Graphene Printing: Integration of Synthesis, Transfer and Patterning

One-step laser induced conversion of a gelatin-coated polyimide film into graphene: Tunable morphology, surface wettability and microsupercapacitor applications

A free-standing laser energy converter based on energetic graphene oxide for enhanced photothermic ignition

Enhanced Organic Solvent Nanofiltration Membranes with Double Permeance via Laser‐Induced Graphitization of Polybenzimidazole

Enhancement in photothermal conversion property of polypyrrole-decorated polyurethane/zirconium carbide fibrous membrane

Femtosecond laser-based construction of 3D spatially distributed graphene oxide surface for enhancing boiling heat transfer

Thin-Film Nanocomposite Reverse Osmosis Membrane with High Flux and Antifouling Performance via Incorporating Maleic Anhydride-Grafted Graphene Oxide

Airflow Enhanced Solar Evaporation Based on Janus Graphene Membranes with Stable Interfacial Floatability.

Elucidating charge transfer process and enhancing electrochemical performance of laser-induced graphene via surface engineering with sustainable hydrogel membranes: An electrochemist's perspective

Multifunctional flexible composite membrane based on nanocellulose-modified expanded graphite/electrostatically spun fiber network structure for solar thermal energy conversion

One-Step Ultraviolet Laser-Induced Fluorine-Doped Graphene Achieving Superhydrophobic Properties and Its Application in Deicing

Laser irradiation of photothermal precursors ‐ a novel approach to produce carbon materials for supercapacitors

Design of a graphene-based core–shell structure for the improvement of photothermic performance

Laser Tailored Multilayer Graphene Grids for Transparent Conductive Electrodes.

Laser‐Induced Porous Graphene/CuO Composite for Efficient Interfacial Solar Steam Generation