Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Femtosecond laser-based construction of 3D spatially distributed graphene oxide surface for enhancing boiling heat transfer

Enhancement in Boiling Heat Transfer Performance Using Reduced Graphene Oxide Coating with Controllable Components and Porous Structures

In situ boiling-induced self-assembly of stably self-dispersed crumpled graphene for efficient utilization of thermal energy

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling

Hybrid graphene oxide/crumpled graphene film via subcooled boiling-induced self-assembly for highly efficient boiling heat transfer

Effect of graphene oxide coating on bubble dynamics and nucleate pool boiling heat transfer

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Boiling and quenching heat transfer advancement by nanoscale surface modification

Femtosecond laser-treated copper sintering surface to enhance pool boiling heat transfer

Highly efficient pool boiling heat transfer on surfaces with zoned rose-petal-inspired hierarchical structures

Enhancement of pool boiling heat transfer by laser texture-deposition on copper surface

The effect of concentration on transient pool boiling heat transfer of graphene-based aqueous nanofluids

Amelioration of Boiling Heat Transfer by 3D Deposition Structure of Graphene-Silver Hybrid Nanoparticle

Nanosecond Laser-Textured Copper Surfaces Hydrophobized with Self-Assembled Monolayers for Enhanced Pool Boiling Heat Transfer

Investigation of Structure-Property-Boiling Enhancement Mechanisms of Copper/Graphene Nanoplatelets Coatings

Investigation of Flow Boiling Performance and the Resulting Surface Deposition of Graphene Oxide Nanofluid in Microchannels

Experimental study of subcooled boiling pool heat transfer and its “hook back” phenomenon on micro/nanostructured surfaces

Experimental and Theoretical Study of Pool Boiling Heat Transfer and Its CHF Mechanism on Femtosecond Laser Processed Surfaces

Laser-Engineered Microcavity Surfaces with a Nanoscale Superhydrophobic Coating for Extreme Boiling Performance

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Pool boiling inside micro-nano composite pores: Thermofluids behaviors and heat transfer enhancement