Abstract:Before the conservation and restoration of many types of cultural heritage, it is necessary to perform careful examination. This study aimed to determine the original building state and deterioration by applying non-destructive testing (NDT) methods in the case of a heritage building. Another goal was to determine, via NDT methods, whether the limestones observed in this study of different forms, colours, and textures were truly different. The Sivas Industry School Ironworking Atelier, which constitutes the research object, is one of the important public buildings in the city of Sivas, Turkey. Within the scope of the study, non-destructive infrared thermography (IRT), Schmidt hammer rebound (SHR) tests, and X-ray fluorescence (XRF) spectroscopy were applied. Accordingly, through IRT, deteriorations, anomalies, and material differences were investigated, and via SHR testing, uniaxial compressive strength (UCS) estimates, strength levels and hardness classes of stones were obtained. Moreover, via XRF spectroscopy, characterization analysis of stones was conducted. The data obtained could provide information to establish a basis for subsequent conservation. The innovation of this study is that although the infrared thermography technique is typically used in the investigation of materials, it was revealed that another technique such as XRF analysis is needed to better determine whether stones that seem different based on IRT are actually different. With IRT technique, anomaly and material detorioration can be determined. In addition to these two techniques, SHR tests that are non-destructive methods are needed to think about mechanical features of the material. Therefore, when determining the conditions and for characterization analysis of a cultural heritage before restoration, different techniques should be jointly used to complement each other.

Monitoring changes in hydric properties of treated stone material with conservation products by time-sequential IR thermography

Development of Thermal Principles for the Automation of the Thermographic Monitoring of Cultural Heritage

Preliminary assessment of the efficacy of nano-MgO-based dispersion for the consolidation of artificial weathered sandstone

Synchrotron radiation X-ray diffraction computed tomography (XRDCT): a new tool in cultural heritage and stone conservation for 3D non-destructive probing and phase analysis of inorganic re-treatments

In situ assessment of superficial moisture condition in façades of historic building using non-destructive techniques

Portable Raman monitoring of modern cleaning and consolidation operations of artworks on mineral supports

Complementary Use of Active Infrared Thermography and Optical Coherent Tomography in Non-destructive Testing Inspection of Ancient Marquetries

Advanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF

In situ DRIFT, Raman, and XRF implementation in a multianalytical methodology to diagnose the impact suffered by built heritage in urban atmospheres

In Situ Evaluation of New Silica Nanosystems as Long-Lasting Methods to Prevent Stone Monument Biodeterioration

Gel Point Determination of TEOS-Based Polymeric Materials with Application on Conservation of Cultural Heritage Buildings

Non-Invasive Assessment of PVA-Borax Hydrogel Effectiveness in Removing Metal Corrosion Products on Stones by Portable NMR

Multitemporal Thermal Imagery Acquisition and Data Processing on Historical Masonry: Experimental Application on a Case Study

Implementation of a non-destructive method to assess weathering deterioration of sandstones in cultural heritage

Thermographic Imaging in Cultural Heritage: A Short Review

Condition and characterization analysis of a twentieth century cultural heritage through non-destructive testing (NDT) methods: the case of the Sivas industry school ironworking atelier in Turkey

Weathering Tests on Raw and Consolidated Vicenza Stone

Assessment of Stone Protective Coatings with a Novel Eco-Friendly Encapsulated Biocide

Antimicrobial chitosan/TPP-based coatings for the prevention of biodeterioration of outdoor stone sculptures

NDT spatial data integration for monumental buildings: technical information management for the Royal Alcazar of Seville

Raman and ATR FT-IR investigations of innovative silica nanocontaniers loaded with a biocide for stone conservation treatments