Abstract:In this work, regenerated cellulose films were prepared with an iced dissolution method, while the physical morphologies and crystal types of the products were systematically characterized with scanning electron microscope (SEM), Fourier transform infrared(FTIR), while X-Ray Diffraction (XRD). The results demonstrate that the as-prepared continuous and uniform films are indeed cellulose Ⅱ, whose morphology and crystal type are significantly different from those of the degreased cotton. Moreover, Terahertz time domain system (THz-TDS) and FTIR were employed to measure the THz spectra of the regenerated cellulose films. Accordingly, the THz characteristic peaks for the regenerated cellulose films are experimentally identified for the first time. In addition, the increase of the THz transmittance with the decrease of the wavenumber is attributed to the existence of amorphous components in the regenerated cellulose films. Although the shapes of Far-IR spectra in the range of 100～700 cm-1 are similar, the absorption peaks of the regenerated cellulose films move to lower wavenumbers (blue shift) compared with those of the degreased cotton. Based on this, we developed a new approach to distinguish the allomorphism of cellulose Ⅱ and cellulose Iβ by Far-IR. Particularly, geometry optimization and IR calculation for the crystal structure of cellulose Ⅱ have been successfully processed by Density Functional Theory (DFT) using periodic boundary condition via CASTEP package. The calculated absorption peak positions are in good agreement with those experimentally measured. Consequently, the THz characteristic peaks of the regenerated cellulose films have been systematically and successfully assigned. Theoretical calculations reveal that the peaks at 42 and 54 cm-1 are assigned to the lattice vibration modes coupled with translational mode and rotational mode, respectively. Moreover, the absorption peaks in the range of 68～238 cm-1 are related with the torsion vibration of —CH2OH group and deformation vibration of C—H bond and O—H bond, while those in the range of 351～583 cm-1 are assigned to the skeletal vibration of C—O—C bond and pyranoid ring, and those at 611 and 670 cm-1 are originated from the out-of-plane bending vibration of O—H bond. Each absorption peak is involved in more than single vibration mode. The THz spectra presented in this work, together with the theoretical simulations, indicate that the THz responses of regenerated cellulose are closely associated with both its chemical constituents and molecular structure. These results will be helpful not only for better understanding the relations between the molecular structure of the regenerated cellulose and its THz spectrum, but also for providing valuable information for future studies on the physical mechanisms of THz responses of other partially-crystalline polymers and organic biological macromolecules.

Study on the photodegradation behaviors of liquid crystal display (LCD) used optical cellulose triacetate films

A cellulose-based light-management film incorporated with benzoxazine resin/tannic acid exhibiting UV/blue light double blocking and enhanced mechanical property

Experimental and Theoretical Study on Terahertz Spectra for Regenerated Cellulose

Structural evolution of cellulose triacetate film during stretching deformation: An in-situ synchrotron radiation wide-angle X-Ray scattering study

[Analysis of Anti-Ultraviolet Characteristic of Liquid-Crystal Display].

Application of cellulose triacetate as biocompatible/biodegradable dielectrics in EWOD devices

Transparent Cellulose/Multi-Walled Carbon Nanotube Hybrids with Improved Ultraviolet-Shielding Properties Prepared from Cotton Textile Waste

Water-Based Approach to High-Strength All-Cellulose Material with Optical Transparency

High-strength and high-toughness tannic acid-modified cellulose films for food preservation

Improved cationic dyeability of thermotropic liquid crystal polyarylate fabrics by ultraviolet irradiation-induced grafting of acrylic acid

Thermochromic properties of composite materials made from polylactic acid reinforced with recovered liquid crystals from waste LCD/LED laptops screens

Cellulose regenerated films obtained from the dissolution of cotton waste in ionic liquid

High-performance green electronic substrate employing flexible and transparent cellulose films

Cross-Linked and Surface-Modified Cellulose Acetate as a Cover Layer for Paper-Based Electrochromic Devices

Influence of direct fluorination treatment on surface and optical properties of colorless and transparent polyimides

Structure and transition behavior of crosslinked poly(2-(2-methoxyethoxy) ethylmethacrylate- co -(ethyleneglycol) methacrylate) gel film on cellulosic-based flat substrate

Fabrication of transparent and hazy cellulosic light-management film for enhancing photon utilization in photocatalytic membrane process

Preparation and Characterization of Cellulose Triacetate Membranes Via Thermally Induced Phase Separation

A novel conversion strategy for organic compounds in waste liquid crystal displays based on the near/supercritical methanol process

Design and Synthesis of Free-Radical/Cationic Photosensitive Resin Applied for 3D Printer with Liquid Crystal Display (LCD) Irradiation

Optical diffuser constructed by assembly of cellulose ether and polymer complex particles