Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

Structural evolution of cellulose triacetate film during stretching deformation: An in-situ synchrotron radiation wide-angle X-Ray scattering study

Structural Evolutions of Initially Amorphous Polymers During Near-Tg Stretching: A Minireview of Recent Progresses

Effects of stretching on crystalline phase structure and morphology of hard elastic PVDF fibers

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Stretch-induced structural transition of linear low-density polyethylene during uniaxial stretching under different strain rates

Stretch-Induced Reverse Brill Transition in Polyamide 46

Structural evolution of biaxially oriented polypropylene films upon asynchronous stretching

Deformation Mechanism of Hard Elastic Polyethylene Film During Uniaxial Stretching: Effect of Stretching Speed

Structural Evolution of Hard-Elastic Polyethylene Cast Film in Temperature-Strain Space: an In-Situ SAXS and WAXS Study

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. Part Iii: Influence of Morphology on Molecular Orientation of Isotactic Polypropylene Films Subjected to Uniaxial Stretching

The Formation of Crystal Cross-Linked Network in Sequential Biaxial Stretching of Poly(ethylene Terephthalate): the Essential Role of MD Pre-Stretch

Structural evolution of ultra-high molecular weight polyethylene gel film stretching at different temperatures with reservation of shish crystals

Stretch-Induced Α-to-β Crystal Transition and Lamellae Structural Evolution of Poly(butylene Adipate-Ran-terephthalate) Aliphatic–Aromatic Copolyester

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Structural Evolution of LLDPE-LMW/HMW Blend During Uniaxial Deformation As Revealed by in Situ Synchrotron Radiation X-ray Scattering

Tuning 3D refractive indices via constrained uniaxial stretch in cellulose triacetate films plasticized with triethyl citrate

Segmental Orientations and Deformation Mechanism of Poly(Ether-Block-Amide) Films

Stretch-induced structural evolution of pre-oriented isotactic polypropylene films: An <i>in-situ</i> synchrotron radiation SAXS/WAXS study

Structural Characteristics of Fibrillar Crystals in Uniaxially Stretched Isotactic Polypropylene Dominated by Temperature and Strain

Real Time Synchrotron SAXS and WAXS Investigations on Temperature Related Deformation and Transitions of Β-Ipp with Uniaxial Stretching