Abstract:Converting industrial sludge into catalytic materials for water purification is a promising approach to simultaneously realize effective disposal of sludge and resource of water. However, manipulating the high efficiency remains a huge challenge due to the difficulty in the active sites control of the sludge. Herein, we proposed a constitutive modulation strategy by the combination of hydrothermal and pyrolysis (HTP) for the fabrication of defects-assistant Fe containing sludge-derived carbon catalysts on upgrading performance in peroxymonosulfate (PMS) activation for pollutant degradation. Adjustable defects on dyeing sludge-derived carbon catalysts (DSCC) were achieved by introducing oxygen or nitrogen functional precursors (hydroquinone or p -phenylenediamine) during hydrothermal processes and by further pyrolysis, where O was detrimental while N was beneficial to defect generation. Compared to the DSCC with less defects (DHSC-O), the defect-rich sample (DHSC-2N) exhibited superior catalytic performance of PMS activation for bisphenol A (BPA) elimination ( k = 0.45 min −1 , 2.52 times of DHSC-O), as well as 81.4% total organic carbon (TOC) removal. Meanwhile, the degradation capacity was verified in wide pH range (2.1–8.1) and various aqueous matrices, reflecting the excellent adaptability and anti-interference performance. Furthermore, the continuous-flow experiments on industrial wastewater showed synchronous BPA and chemical oxygen demand (COD) removal, implying great potential for practical application. Solid electron paramagnetic resonance (EPR) and 57 Fe Mösssbauer spectra analysis indicated that the defects acted as secondary active sites for Fe sites, which were beneficial to accelerating the electron transfer process. The only Fe active sites preferred the radical pathway. The controllable reaction tendency provides possibilities for the on-demand design of sludge-based catalysts to meet the requirements of practical wastewater treatment under Fenton-like reaction.

Controllable preparation of MnCo 2 O 4 spinel and catalytic persulfate activation in organic wastewater treatment: Experimental and immobilized evaluation

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Combustion synthesis of mesoporous CoAl2O4 for peroxymonosulfate activation to degrade organic pollutants

Inert magnesium-doped Co 3 O 4 spinel assembling catalytic membrane for instantaneous peroxymonosulfate activation and contaminants elimination

Enhanced activation of peroxymonosulfate with cobalt-doped manganese-iron oxides for contaminant degradation: Regulation of oxygen vacancy defects

Facile synthesis of CoMn 2 O 4 spinel catalyst as peroxymonosulfate activator for efficient rhodamine B degradation

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Electronic Structure Modulation and Peroxymonosulfate Activation Mechanism of N-doped MnCo2O4: A Study on the Efficient Catalytic Degradation of Sulfamethoxazole

Long-acting CoAl2O4 spinel catalyst developed on activated alumina pellets by facile synthesis to activate peroxymonosulfate: Controllable cobalt leaching and environmental adaptability

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

Enhanced Heterogeneous Peroxymonosulfate Activation by MOF-Derived Magnetic Carbonaceous Nanocomposite for Phenol Degradation

Bio-synthesis of Co-doped FeMnOx and its efficient activation of peroxymonosulfate for the degradation of moxifloxacin

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Ultrafast degradation of organic pollutants in an Fe3O4-CoS2-x activated persulfate catalytic system with an Fe-Co catalytic cycle involving oxygen and sulfur vacancies

Rational Regulation of Peroxymonosulfate Activation over Porous Co3O4 with Carbon Coating to Boost Utilization Efficiency of Peroxymonosulfate and Achieve Rapid Removal of Pollutants.

Controllable fabrication of Co-CoO architecture: morphology, defects and metal components toward efficient degradation of organic pollutants

Highly efficient catalyst of Crednerite CuMnO2 for PMS activation: Synthesis, performance and mechanism

Enhanced peroxymonosulfate (PMS) activation process mediated by vanadium modified CoO catalyst for rapid degradation of organic pollutants: Insights into the role of V

Radiation-induced Preparation of Nanoscale CoO@graphene Oxide for Activating Peroxymonosulfate to Degrade Emerging Organic Pollutants

Highly dispersed CoFe2O4 spinel on biomass-derived 3D porous carbon framework for much enhanced Fenton-like reactions

Construction of mesoporous S-doped Co3O4 with abundant oxygen vacancies as an efficient activator of PMS for organic dye degradation