Abstract:Commercially pure titanium (cp-Ti) and Ti-6Al-4V alloy have emerged as excellent candidates for use as biomaterials in medical implants due to their high strength-to-weight ratio and biocompatibility. β-type Ti alloys composed of non-toxic metallic elements such as niobium (Nb) have been extensively studied in order to resolve the issue of a high elastic modulus and toxicity of certain elements, particularly in Ti-6Al-4V alloy. Titanium hydride (TiH2) has recently received a lot of attention due to its densification, oxidation levels, and material costs. Powder metallurgy combined with mechanical alloying has become an attractive route for producing near-net shape components of Ti-based alloys, mainly where porosity control and better homogeneity are required. This review aims to create a platform for investigating the feasibility of producing Ti from TiH2 via a dehydrogenation process. The dehydrogenation behaviour of TiH2 is affected by variables such as sintering condition, alloying element, and particle size. The review revealed that TiH2 decomposition occurs at various temperatures (400 °C to 800 °C), resulting in the formation of several sequences of phases. Although the dehydrogenation process was unaffected, the addition of alloying elements was found to change the starting and ending temperatures of the reactions. The use of vacuum accelerates the dehydrogenation process more than argon flow. TiH2 powder with smaller particle size, on the other hand, eliminates hydrogen faster than larger ones due to the larger surface area exposed. This review also looks at the best processing conditions for getting a high concentration of β phase in Ti-Nb alloys. β-type titanium alloys with a low elastic modulus (10-40 GPa) similar to human bone are a potential strategy for reducing premature implant failure.

Spontaneous room temperature reaction of titanium and its alloys with hydrogen during self-shearing reactive milling

Directed Stabilization by Air-Milling and Catalyzed Decomposition by Layered Titanium Carbide Toward Low-Temperature and High-Capacity Hydrogen Storage of Aluminum Hydride

Formation of Titanium Hydride in Ti–6Al–4V Alloy

Deoxidation of Titanium Alloy Using Hydrogen

Influences of Hydrogenation on Room Temperature Microstructure of Ti6Al4V Alloy

Influence of mechanical milling on the hydrogen absorption properties of TiCrV – based alloys

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Hydrogen Induced Microstructure Evolution of Titanium Matrix Composites

Microstructure Evolution and Hydrogen Absorption Characteristics of Gradient-Hydrogenated Ti-4.5al-3v-2mo-2fe Alloys

An Experimental Study of the (ti–6al–4v)–xh Phase Diagram Using in Situ Synchrotron XRD and TGA/DSC Techniques

Hydrogen Induced Softening Mechanism in Near Alpha Titanium Alloy

Hydrogen release from titanium hydride in foaming of orthopedic NiTi scaffolds.

Insights into hydrogen-induced strengthening mechanism of TiC/Ti6Al4V via experiments and first-principles calculations

Hydrogenation Properties of the Ti45Zr38−xYxNi17 (5 ≤ x ≤ 10) and the Ti45−zYzZr38Ni17 (5 ≤ z ≤ 15) Mechanically Alloyed Materials

Effect of Milling Parameters on the Dehydrogenation Properties of the Mg−Ti−H System

Formation of Titanium Hydride from the Reaction Between Magnesium Hydride and Titanium Tetrachloride

Microstructural Evolution and Hydride Precipitation Mechanism in Hydrogenated Ti–6Al–4V Alloy

Exploration and Development of (tib + TiC)/Ti6Al4V Through the Economically Viable Melt Hydrogenation Technique

Hydrogen storage properties of the Mg–Ti–H system prepared by high-energy–high-pressure reactive milling

Influence of processing parameters on dehydrogenation of TiH2 in the preparation of Ti-Nb: A review

Hydrogen Induced Softening and Hardening for Hot Workability of (tib + TiC)/Ti-6Al-4V Composites