Abstract:The adoption of lean premixed prevaporised combustion systems can reduce NOx emissions from gas turbines, but unfortunately also increases their susceptibility to thermoacoustic instabilities. Initially, acoustic waves can produce heat release fluctuations by a variety of mechanisms, often by perturbing the equivalence ratio. If correctly phased, heat release fluctuations can subsequently generate more acoustic waves, which at high amplitude can result in significant structural damage to the combustor. The prediction of this phenomenon is of great industrial interest. In previous work, we have coupled a physics based, kinematic model of the flame with a network model to provide the planar acoustic response necessary to close the feedback loop and predict the onset and amplitude of thermoacoustic instabilities in a lab-scale, axisymmetric single burner combustor. The advantage of a time domain approach is that the modal interaction, the influence of harmonics, and flame saturation can be investigated. This paper extends this approach to more realistic, annular geometries, where both planar and circumferential modes must be considered. In lean premixed prevaporised combustors, fluctuations in equivalence ratio have been shown to be a dominant cause of unsteady combustion. These can occur, for example, due to velocity perturbations in the premix ducts, which can lead to equivalence ratio fluctuations at the fuel injectors, which are subsequently convected downstream to the flame surfaces. Here, they can perturb the heat release by locally altering the flame speed, enthalpy of combustion, and, indirectly, the flame surface area. In many gas turbine designs, particularly aeroengines, the geometries are composed of a ring of premix ducts linking a plenum and an annular combustor. The most unstable modes are often circumferential modes. The network model is used to characterise the flow response of the geometry to heat fluctuations at an appropriate location, such as the fuel injectors. The heat release at each flame holder is determined in the time domain using the kinematic flame model derived, as a function of the flow perturbations in the premix duct. This approach is demonstrated for an annular ring of burners on a in a simple geometry. The approach is then extended to an industrial type gas turbine combustor, and used to predict the limit cycle amplitudes.

Low-Order Modeling and High-Fidelity Simulations for the Prediction of Combustion Instabilities in Liquid Rocket Engines and Gas Turbines

Combustion Instability Detection Based on Multi-Signal Information Fusion for an Industrial Gas Turbine Combustor

Performance assessment of flamelet models in flame-resolved LES of a high Karlovitz methane/air stratified premixed jet flame

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Low Mach number lattice Boltzmann model for turbulent combustion: flow in confined geometries

Numerical Analysis of High Frequency Transverse Instabilities in a Can-Type Combustor

Low-order modeling approach for the prediction of transverse combustion instabilities in multi-injector engines

Computational investigations of the coupling between transient flame dynamics and thermo-acoustic instability in a self-excited resonance combustor

Combustion Instabilities in Complex Chamber Geometries of Solid Propellant Rocket Motors

Combustion Rumble Prediction with Integrated Computational-Fluid-Dynamics/Low-Order-Model Methods

Coupling of Harmonic Flow Oscillations to Combustion Instability in Premixed Segments of Triple Flames

Low-Order Modelling of the Response of Ducted Flames in Annular Geometries

Numerical Investigation of Supercritical Combustion Dynamics in a Multi-Element LOx-Methane Combustor Using Flamelet-Generated Manifold Approach

Experimental and numerical study of nonlinear growth process of self-excited combustion instability in a model rocket combustor

Combustion Instability of a Multi-injector Rocket Engine Using the Flamelet Progress Variable Model

Numerical investigation of high-pressure combustion in rocket engines using Flamelet/Progress-variable models

Large eddy simulation and low-order modelling of azimuthal thermoacoustic instability in a gas turbine model annular combustor

Thermodynamic analysis and large-eddy simulations of LOx-CH4 and LOx-H2 flames at high pressure

Physics-aware neural network flame closure for combustion instability modeling in a single-injector engine

Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor

Combustion Dynamics of Ten-injector Rocket Engine Using Flamelet Progress Variable