Abstract:The primary cause of embankment dam failure is the overtopping of the crest, making dam safety a crucial consideration due to the potential for catastrophic consequences. Dam safety regulations and guidelines are increasingly demanding the enhancement of rockfill dams’ resistance to overtopping and leakages. Assessing the breaching of embankments is essential for conducting risk evaluations and hazard studies. Typically, this assessment is carried out using parametric breach models, which are statistically derived equations based on historical dam failure cases. However, these models often overlook important parameters such as material properties, leading to uncertainties in the results. This research focuses on quantifying the accuracy of breach parameters (breach width, failure time, peak outflow) predicted by various parametric breach models found in the literature. Three prototype embankment dams (homogeneous earthfill dam, homogeneous rockfill dam, and zoned rockfill dam), along with five historical failure cases, are considered to evaluate the predictive capability of the parametric breach models. The study compares the measured and estimated breaching parameter values, aiming to identify the most suitable parametric breach model based on the dam design. The results indicate that the performance of the different equations in estimating breach parameters significantly depends on the characteristics of the dam and reservoir. Additionally, a simplified physical model (DLBreach) is employed to estimate breach parameters for the three prototype dams, and a comparison with results from parametric breach models is presented. In conclusion, accurately predicting breach parameters is vital for improving dam safety. This research highlights the influence of dam and reservoir characteristics on the performance of different parametric breach models. By identifying the most suitable breach models for specific dam designs, this study contributes to the understanding and management of embankment dam failures.

Evaluation of Parametric Breach Models from Prototype and Historical Embankment Dams under Overtopping Conditions

A Depth-Averaged 2-D Model of Non-Cohesive Dam/Levee Breach Processes

Two-dimensional Levee Breaching Model Considering Flow and Sediment Interaction

Development of Probabilistic Dam Breach Model Using Bayesian Inference

Physical modeling into outflow hydrographs and breach characteristics of homogeneous earthfill dams failure due to overtopping

Experimental Study on Sand Dike Breaching by Wave Overtopping

Dam Breach Simulation with the Material Point Method

Investigating the Non-Linear Effects of Breach Parameters on a Dam Break Study

Breach parameters for cascade dams’ breaks using physical, empirical and numerical modeling

Breaches of embankment and landslide dams - State of the art review

Breaching parameters of landslide dams

Novel approach to the derivation of dam breach parameters in 2D hydrodynamic modeling of earthquake induced dam failures

Uncertainty analysis on flood routing of embankment dam breach due to overtopping failure

Dam Breaching Models and Soil Mechanics Analysis

Cellular automata model-based numerical analysis for breaching process of embankment dam

SPH–DEM modeling overtopping failure of earthfill dams

Real time prediction approach for floods caused by failure of natural dams due to overtopping

Experimental study on the process of overtopping breach of concrete-faced sand-gravel dam

An empirical model calculating the breach parameters of landslide and debris-flow dam

Numerical Simulation of Landslide Dam Breaching Due to Overtopping

Simulation of breaching of laboratory-scale earth dams by overtopping with XBeach