Abstract:A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people's lives, properties, and infrastructures. In this study, based on the three-dimensional Reynolds-averaged Navier-Stokes equations (RANS), the renormalization group (RNG) k-ε turbulence model, suspended and bed load transport equations, and the instability discriminant formula of dam breach side slope, and the explicit finite volume method (FVM), a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed. The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams. A model test of the breaches of two cascading landslide dams has been used as the validation case. The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other, and the relative errors of the key breaching parameters, i.e., the peak breach flow and the time to peak of each dam, are less than ±5%. Further, the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures. Three key parameters, i.e., the distance between the upstream and the downstream dams, the river channel slope, and the downstream dam height, have been used to study the flood amplification effect. The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams, and the downstream dam height. Further, the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope. When the flood caused by the upstream dam failure flows to the downstream dam, it can produce a surge wave that overtops and erodes the dam crest, resulting in a lowering of the dam crest elevation. This has an impact on the failure occurrence time and the peak breach flow of the downstream dam. The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material. Moreover, the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model. In comparisons of the calculated and measured breach hydrographs and final breach morphologies, the relative errors of the key dam breaching parameters are all within ±10%, which verify the rationality of the model is applicable to real-world cases. Overall, the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Simulating the 1976 Teton Dam Failure using Geoclaw and HEC-RAS and comparing with Historical Observations

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

A Depth-Averaged 2-D Model of Non-Cohesive Dam/Levee Breach Processes

Modelling Flood Wave Propagation as a Result of Dam Piping Failure Using 2D-HEC-RAS

Numerical Simulation for Dam-Break Flood in Hurricane-Prone Regions

GeoFlood: Computational model for overland flooding

Numerical modeling of Glacial Lake Outburst Floods using physically based dam-breach models using

Comparative Analysis and Risk Assessment of Dam-Break Floods: Taking Pingshuijiang Reservoir As an Example

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

Physically Based Simulation of Dam Breach Development for Tangjiashan Quake Dam, China

Blasts from the Past: Reimagining Historical Storms with Model Simulations to Modernize Dam Safety and Flood Risk Assessment

Numerical modelling of Glacial Lake Outburst Floods using physically based dam-breach models

Dam Breach Simulation with the Material Point Method

Simulation of Dam Breach Development for Emergency Treatment of the Tangjiashan Quake Lake in China

Novel approach to the derivation of dam breach parameters in 2D hydrodynamic modeling of earthquake induced dam failures

Quantifying landscape change following catastrophic dam failures in Edenville and Sanford, Michigan, USA

Using historic aerial photography and paleohydrologic techniques to assess long-term ecological response to two Montana dam removals

3D-SPH-DEM coupling simulation for the large deformation failure process of check dams under debris flow impact incorporating the nonlinear collision-constraint bond model

Spatio-Temporal Performance of 2D Local Inertial Hydrodynamic Models for Urban Drainage and Dam-Break Applications

Nonlinear Seismic Response Analysis of High Arch Dams to Spatially-Varying Ground Motions

Prototype Scale Evaluation of Non-Newtonian Algorithms in HEC-RAS: Mud and Debris Flow Case Studies of Santa Barbara and Brumadinho