Usage of non-invasive technique to diagnose a photovoltaic plant

Marcelo Esposito Renato Calegari Joaquim Guerreiro Marques Oumaima Mesbahi Mouhaydine Tlemcani a Environmental and Sanitary Engineering,Federal University of Fronteira Sul,Erechim,Brazilb IDMEC,Department of Mechatronics Engineering,School of Sciences and Technology,University of Évora,Évora,Portugalc ICT,Department of Mechatronics Engineering,School of Sciences and Technology,University of Évora,Évora,PortugalMarcelo Esposito has a degree in Electrical Engineering from the State University of Santa Catarina/UDESC Brazil (2003),a master's degree in Chemical Engineering from the Federal University of Santa Catarina/UFSC Brazil (2006) and a PhD in Chemical Engineering from the Federal University of Santa Catarina/UFSC Brazil (2010). He has a post-doctorate from the University of Évora/UÉ Portugal (2023),which he completed in the Renewable Energy Engineering course and the Mechatronics Engineering master's programme. He was a lecturer at the Federal University of Pelotas/UFPel Brazil from 2010 to 2018,on the Control and Automation Engineering and Electronic Engineering courses,working in the areas of Signals and Linear Systems,Feedback Systems,Multivariable Control and Non-Linear Systems. He is currently a Professor at the Federal University of Fronteira Sul Campus Erechim/UFFS Brazil (2019 - current). He has been working in the field of photovoltaics since 2015 and uses a 400kWp photovoltaic plant as an experimental unit dedicated to the Laboratory of Electricity and Electrical Machines (UFFS) for which he is responsible. Since 2019 he has devoted himself exclusively to photovoltaic and wind energies. He is also Professor of Environmental and Sanitary Engineering at UFFS.Renato Calegari has a degree in Mathematics from the Integrated Regional University of Alto Uruguai e das Missões/Brazil (2003),another degree with specialisation in Mathematics and Physics from the Integrated Regional University of Alto Uruguai e das Missões/Brazil (2005) and a Master's degree in Physics Teaching from Franciscan University/Brazil (2010). He is currently a Laboratory Technician at the Federal University of Fronteira Sul Campus Erechim/UFFS Brazil. He has experience in general laboratory techniques,instrumentation systems,photovoltaics and wind energy.Joaquim Marques was awarded a Master's degree (1999) and a Doctorate (2006) in Aerospace Engineering by Universidade de Lisboa. He is an Assistant Professor in the disciplinary area of Aeronautical and Aerospace Engineering at the School of Science and Technology of the University of Évora and Vice-Chair of the Department of Mechatronics Engineering at the same university. He has also collaborated with IDMEC - Institute of Mechanical Engineering (at the Center for Aeronautical and Space Science and Technology) and ICT (Institute of Earth Sciences). He is participating in the EU-funded project Environmentally Friendly Aviation for all Classes of Aircraft (2023-2026),and his current research focuses on stability and control of new aircraft configurations,greening of aviation,and renewable energy modeling.Oumaima Mesbahi received the M.Sc. in Electromechanic Engineering from National University of Arts and Crafts (ENSAM),Meknes,Morocco,in 2016. She got her PhD in Mechatronic Engineering in 2023,University of Évora,Portugal. She currently a researcher in the same university. She is an integrated member of the Instrumentation and Control Laboratory of the Institute of Earth Sciences (ICT),Evora,Portugal. Her research interests include photovoltaic system characterization and parameter identification,low cost instruments and MPPT technologiesMouhaydine Tlemçani received the M.Sc. degree in Electrical Engineering from Slovak Technical University,Bratislava,Slovak Republic,in 1992 and the Ph.D. degree from the University of Évora,Portugal,in 2007. He is currently Assistant Professor of Instrumentation and Control Theory at the Department of Mecha- tronic Engineering,University Évora. He is a Full Member of the ICT (Institute of Earth Sciences) and also the founder and present coordinator of the Instrumentation and Control Laboratory at the ICT. His current research interests include physical measurements,system modelling,photovoltaic systems,embedded systems and non-destructive testing.

DOI: https://doi.org/10.1080/15567036.2024.2392041

2024-08-24

Energy Sources Part A Recovery Utilization and Environmental Effects

Abstract:The present work utilizes an intelligent technique to lower photovoltaic systems' operating and maintenance costs. In 2013, inverter manufacturer Huawei pioneered this concept with the development of multi-MPPT (Maximum Power Point Tracking) string inverters covering 14 different types of faults of photovoltaic systems. So far, the main advantage that the authors of this work have identified when using Huawei's "Smart I-V Curve Diagnosis" function is the ease with which mismatch situations can be perceived and located in the photovoltaic plant, without having to install individual optimizers in each of the modules. This methodology required a specific data logger and a software license. Additionally it is only available for large inverters, over 100 kW. The "Smart" function indicates the faulty string. To identify the damaged module, the authors used thermographic images. The diagnostic approach showed that all strings achieved the nominal. Fill Factor (FF) of 78%. Commissioning tests concluded all strings were normal, but I4S1 and I4S2 tests required repetition due to their unique configuration. A fault in module 1 of I4S7, undetected during commissioning, was later confirmed by Smart I-V Curve Diagnosis and infrared thermography.

energy & fuels,engineering, chemical