Abstract:This paper describes an investigation of the possible benefits from wing optimisation in improving the performance of Micro Air Vehicles (MAVs). As an example we study the Avion (3.64 kg mass, 1.60 m span), being designed at the CSIR National Aerospace Laboratories (NAL), Bengaluru. The optimisation is first carried out using the methodology described by Rakshith \emph{et al.} (using an in\textendash house software PROWING), developed for large transport aircraft, with certain modifications to adapt the code to the special features of the MAV. The chief among such features is the use of low Reynolds number aerofoils with significantly different aerodynamic characteristics on a small MAV. These characteristics are taken from test data when available, and/or estimated by the XFOIL code of Drela. A total of 8 optimisation cases are studied for the purpose, leading to 6 different options for new wing planforms (and associated twist distributions along the wing span) with an improved performance. It is found that the improvements in drag coefficient using the PROWING code are about 5%. However, by allowing the operating lift coefficient $C_L$ to float within a specified range, drag bucket characteristics of the Eppler E423 aerofoil used on Avion can be exploited to improve the endurance, which is a major performance parameter for Avion. Thus, compared to the control wing $W_0$ (with operating point at $C_L$ =0.7) used in the preliminary design, permitting a variation of $C_L$ over a range of $\pm$ 10% is shown to enhance the endurance of wing $W_4$ by 18.6%, and of wing $W_{6}$ with a permitted $C_L$ range of $\pm$ 50% by 39.2%. Apart from the philosophy of seeking optimal operating conditions for a given configuration, the advantages of optimising design parameters such as washout of a simple wing proposed in the preliminary design stage, is also demonstrated.

Experimental Investigation of Effect of Corrugations on Delta Wing for Lift Enhancement in Low Reynolds Number Flow

Effects Of Cambers On Gliding And Hovering Performance Of Corrugated Dragonfly Airfoils

Biomimetic Wings for Micro Air Vehicles

Effects of Cambers of Corrugated Airfoils on Gliding Performance by Using Lattice Boltzmann Method

Aerodynamic Performance of Dragonfly Wing with Well-Designed Corrugated Section in Gliding Flight

Aerodynamic performance of a tandem wing configuration inspired from dragonfly gliding flight for MAV application

Dynamic lift enhancement mechanism of dragonfly wing model by vortex-corrugation interaction

Numerical analysis of low Reynolds number flows around thin wings for micro aerial vehicle

Experiment Research on Aerodynamics of Flexible Wing MAV

A Comparative Study of the Aerodynamic Performance of Box-wings and Mono-wings at Low Reynolds Number

Wing Optimisation for a tractor propeller driven Micro Aerial Vehicle

Three-Dimensional Simulation of Micro Air Vehicles with Low-Aspect-Ratio Wings

Geometrical parameters effect on aerodynamic performance of infinite tubercle leading edge wings

Experimental research on the high angle of attack aerodynamic characteristics of an 80°/65° double-delta wing

A study on the aerodynamic behaviors learned from microscopy imaging of beetle corrugated hindwing

Simulation Of Aerodynamics Of Micro Air Vehicles At Low Reynolds Numbers

Unsteady Low-Reynolds Number Aerodynamic Analysis For Flapping Wing Mav Executing a 3D Motion

Influence of bioinspired morphing on the flow field characteristics of UAV wings at low Reynolds number

Aerodynamic shape optimization at low Reynolds number using multi-level hierarchical Kriging models

A numerical investigation into the effects of Reynolds number on the flow mechanism induced by a tubercled leading edge

Aerodynamic Effects of Time-Varying Corrugations on Dragonfly Wings in Flapping Flight